Drop Test Machine will ship to Korean customers

AI SI Li (CHINA) TEST EQUIPMENT CO., LTD
Favorites

single-arm Drop Test Machine for Packages

Drop Test Machine is applied to assess the package in the actual transportation, loading and unloading process by dropping the degree of impact, impact-resistant strength and evaluate the reasonable of packaging design.

Drop Test Machine Feature:

1. The main axle of tester used dual axle rode, high precision and good stability. Power failure safety design, it will be kept the original condition under power cut and the swing arm will not break away unusually.

2. The tester has set limits upward and down, will not exceed safety range when testing.

3. Support arm with electronic reset capability, can avoid the accident by manual operation.

4. Multi-functional sample supporter: Can rapidly fix the different size package to test the package edges, sides and corners.

5. Micro adjusting control, can rapidly set to the needed testing height.

AS-DT-150 Drop Test Machine Technical Parameters:

Height of Drop (mm):300~1500

Max. Dimension of Test Sample WxHxD (mm):1000x800x1000

Falling Floor Size WxHxD (mm):1700x50x1200

Drop Method:Face, edge, angle

Test Bench External Dimension WxHxD (mm):1700x2300x1200

Drop Test Machine
Drop Test Machine Control Panel

POWER: press this button and this machine will be power on. DOWN: press this button and dropping arm of the machine will go down. STOP: press this button and dropping arm will stop rising or dropping; DROP: press this button and test sample will drop freely. RESET: replacing for dropping arm of machine; (Special note: support arm will delay 20-30 seconds for replacing after pressing “RESET” button. Always bear in the mind that other operations are prohibited until the yellow lamp of this button goes out. If not, equipment will be damaged) UP: press this button, and machine will ascend automatically according to setting value of height display column.

Associated Trend items

Related Searches