Frequently the flowscreen is used in the dosing technology for process monitoring. A lot of factors are influencing the dosing quality a lot here: For example process fluctuations like unstable or pulsating flowrates, vibrant pressure variations, air pockets or homogeneity amendments can be monitored by flowscreen. As signal generator the pressure sensor flowplus16 c...
Key Applications PWM Inverter Drive Efficiency Analysis Standby Power AC/DC Converters Solar Arrays UPS Power Quality High Frequency Power Electronics Featuring the industry renowned planar shunt technology (A shunt design topology developed by N4L) and FPGA based real time no gap analysis techniques, the PPA3500 is able to provide ground breaking 6 phase ana...
flow/level/temperature switch that is compliant with the European Union’s Restriction of Hazardous Substances (RoHS) Directive will find the newly redesigned FLT93® Series FlexSwitch™ from Fluid Components International (FCI) to be an effective and highly reliable solution in a wide range of fluids and industrial applications. Redesigned with new high-density surfa...
Numerous advantages thanks to sophisticated constructions Measuring pressures in low to high viscosity material is depending on the preferably direct coupling of the sensor element to the medium. At the same time negative influencing parameters like undercuts and dead spaces have to be avoided. Therefore ViscoTec’s developers found a solution to transfer the pressure by...
Using the latest miniaturisation technologies these compact devices are able to be equipped with two independent universal inputs, two binary or two analogue outputs, as well as communication port RS-485 with Modbus protocol. A large built-in display and output signals mean that the ProSens units find applications in control systems. There are many industrial applicat...
It became more useful. The main improved points are 1. The battery charging time became shorter. (Necessary time for full charging 8 hours →2hours. The continuous using time is same 8 hours as before) 2. Setting lock function to prevent malfunction has been installed. 3. The output sampling rate for a USB flash drive became selectable. (100Hz, 50Hz or 1 Hz. Only fo...
For measurements in: - Large industrial plants (Steel , Oil & Gas, Chemical & Pharmaceutical, Automotive, etc) - Energy audits - Automation and control of production - Environmental monitoring - Data acquisition processes, remote control and remote management - Laboratories and testing activities - Industrial processes and heat engineering The main features: -...
The encoder is tough enough to handle even the most extreme environmental conditions. Extremely robust and resistant to environmental influences, it withstands the harshest weather conditions. With protection class IP65/IP67, a wide temperature range of -40 °C to + 85 °C (-40 °F to 185 °F), and a special coating process, it is perfectly suited for mobile machines with t...
The compact eddyNCDT 3001 eddy current sensor with integrated controller, for example, monitors the oil gap in hydrostatic bearings. These bearing systems are used in many plants such as stone mills or telescopic installations. These bearing systems are continuously supplied with liquid lubricant via an external pressure supply. The lubricant is pressed between the beari...
A diverse range of applications makes the MAVOSPEC BASE a reliable partner to the lighting specialist where selection, coordination, inspection, verification, comparison and evaluation of the light and color quality of various light sources from different manufacturers are concerned. Measured values can be saved to the 8 GB microSD memory card integrated into the batt...
Series CT18 and CT18LL HEITRONICS Infrared Radiation Pyrometer Series CT18 and CT18LL are specially designed for highest measuring accuracy in temperature determination and -control in the metalworking industry, in semiconductor processes, in glass manufacturing, in foundries or generally for use in extremely harsh environments. Even the use at ambient temperature...
Where Flow Conditioning Is Needed Air flow measurement is most accurate in straight duct runs where air flow can be evenly profiled across the duct at the point of measurement and where no turbulent, reverse, or cyclonic flow patterns are present. Typically, it can take as much as 10 diameters of straight duct run to eliminate turbulent or reverse flow, while it can t...
This new series of sensors includes four new sensor ICs – which offer a sensitivity of 11 Gauss max, making the sensors among the most highly sensitive in their class for standard power applications. This allows for design with larger air gaps between the sensor IC and the magnet or for the design engineers to decrease the total cost of their designs by using smaller, le...
The XL2 Analyzer is widely respected as the go-to device for reliable noise and vibration measurements. It starts up instantly and provides deep analysis; 1/12th octave RTA and zoom FFT with 0.4 Hz resolution, displayed on the handheld screen and saved to the internal SD card. Switch easily between acoustic and vibration measurements. Smart sensor sensitivity detecti...
The series of instruments offers nominal power ranging from 500 to 800 W with output voltages from 35 to 120 V and current up to 22.5 A. They’re distinguished by good dynamic response in the event of setpoint changes and sudden load changes. Rated nominal values can be continuously delivered thanks to the highly stable power output and can always be replicated thanks ...
The Leica LS15 completes all steps of a project, streamlining the traditionally demanding, often tedious, tasks associated with the levelling process. Industry-leading 0.2 mm accuracy is achieved by simply aiming at the target via the colour touch display and pressing the measuring button. Such features as an electronic bubble, tilt checks prior to each measurement and a...
It became more user friendly. The main improved points are 1. The battery charging time became shorter. (Necessary time for full charging 8 hours →2hours. The continuous using time is same 8 hours as before) 2. Setting lock function to prevent malfunction has been installed. 3. The output sampling rate for USB flash drive became selectable. (100Hz, 50Hz or 1 Hz. On...
The unique PENKO way of measuring high speed 1600 conversions/s, and high internal resolution, 24 bits, guarantees a fast and accurate data transfer and/or cut off. These characteristics allow application of the instruments for static and dynamic force measurement as well as for destructive material tests. These applications are supported with zero adjustment, track reco...
The power supplied is required at 8-30 Vdc, except for the version LP UVI 02 AV10 (voltage output 0-10 V) which is of 15-30 Vdc. The instrument is managed to operate for long periods without maintenance (except cleaning of the dome and checking the status of silica gel) provided that it is properly powered. This feature makes the device ideal for use in remote weather s...
Technologically speaking, the SGH10 cylinder stroke measuring system pursues an entirely different technological approach than measuring systems commonly found on the market, which are based on magneto-restrictive, inductive, or hall based technology. In contrast to these systems, a Bowden cable mechanism installed directly in the cylinder is used to measure the stroke. ...
Food suppliers and manufacturers will be happy to know PerkinElmer has produced the DailyGuard milk powder analyzer, a near infrared (NIR) spectrometer. The DailyGuard’s system enables rapid testing of adulterants and compounds for real-time results. The DairyGuard, with its analyzer’s preconfigured mathematical models of specific analytic profiles, is indeed the ideal s...
Welcome to the Matrix. Imagine a World where authentication is effortless. So simple it only requires your heartbeat. No more PINs, passwords and codes. Or should we say, no more time lost searching for a forgotten login. Impressive, isn’t it? This is no more a futuristic vision, thanks to the Nymi, the result of Carbon Design Group and Bionym’s collaboration. For the fi...
Don’t be misled by the name, the DEVIL® (DEnsity, VIscosity Liquids) is a smart sugar content measuring system specially designed for the beverage industry. Commercialized by Avenisense, its small size and robustness enable it to monitor fluids such as paints, inks, polymers, gels, engine oils, lubricants, fuels and solvents in real-time, no matter the potential hard con...
Vision Engineering had already found success with its Mantis Elite stereo microscope. Today’s new release, the Mantis Elite-Cam, is an upgraded version of the previous. The addition consists of a precious asset: a factory- integrated and sealed USB2.0 digital camera, permitting simultaneous optical and digital viewing. The Mantis Cam can be used with all Mantis Elite opt...
The Michell Instruments’ Liquidew I.S. moisture in liquids analyzer has been selected by a major producer of synthetic rubber in Asia. The plant chose to go with six Liquidew I.S. analyzers, installed at key points in the process to monitor moisture levels in the feedstock and the solvent as well as in the drying process used to regenerate the solvent. The choice to go w...
Reducing energy use is a serious concern for the planet and consequently for the industrial sector. Qbotix didn’t miss that and offers to trade traditional sources of energy for solar power with their unconventional tracking system. What should be a priority is often neglected due to its cost, an element that Qbotix has kept in mind while elaborating their offer. Just li...
Servomex, the world leader in gas analysis, has launched the SERVOTOUGH MiniLaser Ammonia as a follow-up to its SERVOTOUGH MiniLaser Oxy, launched in January 2015. Both of these devices are based on the company’s proprietary MiniLaser platform. The SERVOTOUGH MiniLaser Ammonia is claimed to be the “world’s smallest cross-stack Tunable Diode Laser (TDL) gas analyzer.” In ...
The construction industry is changing and innovative technology is the chief driver of this change. FARO, a world leader in 3D measurement technology, have made several important contributions in this field of innovation: including their FARO Laser Scanner Focus X Series. This series of laser scanners allows building professional to turn 2D into 3D – recording anything f...
The packaging industry is very strict when it concerns quality for its production process. SICK delivers an ideal solution to guarantee higher efficiency and consequent distinction, with the DeltaPac MultiTask photoelectric sensor. Based on Delta-S-Technology, it benefits from four PinPoint emitters and two receivers with SIRIC® and distance measurement technology. Ob...
A new grain moisture sensor with incomparable advantages, positioning it as a highly competitive device on a worldwide scale. Indeed, the features are as follows: indications are independent of its density, additional calibration is not required during microwave sensor service life, measurement is highly accurate and continuous automatic measurement of the current val...
The Ministry of Defence (MoD) in the UK has unveiled its vision of what British soldiers will be wearing in 2020. The futuristic military uniform features sensor-laden body armor, a smartwatch that monitors health signs and tactical helmet/eyewear with integrated cameras. The Future Soldier Vision (FSV) is part the MoD’s plan to provide the British soldiers of the futur...
Vumii, manufacturer of rugged and reliable long-range, 360° security cameras have amplified the capabilities of the Sli and Accuracii product lines by powering them to detect fires with state-of-the-art algorithms. In addition to detecting fires, the algorithm-equipped surveillance cameras can also help prevent fires by detecting when they are about to occur. Built to wi...
SYNERGYS TECHNOLOGIES’ LKS 1000 is a handheld device that visually identifies gas and air leaks. Visual dynamic real time target technology zooms in on costly leaks and displays their precise location on a large-size, integrated LCD screen. The color and size of the dynamic target changes from yellow to red to illustrate the severity of the leak. dB RMS and MAX values ar...
Introducing the fastest and most portable infrared camera on the market. The optris PI 640 is a high quality thermal imager in a very compact size. It measures 45 x 56 x 90 mm and weighs only 320 grams – and that’s including the lens. Its compact size is not its only talking point. It comes with an impressive array of technical specifications, including a temperature ...
FLIR Systems, a world leader in thermal imaging, has unveiled its new highly-portable FLIR C2 camera. Described by FLIR as the “first full-featured, pocket-sized thermal camera” the C2 is designed to help building experts and other professionals uncover hidden issues, for example sources of heat loss. The FLIR C2 builds upon existing systems and includes FLIR’s patented ...
The Fluke Corp. range of industrial infrared cameras now includes the Ti90 and Ti95. The IR cameras can help technicians detect problems before they develop into catastrophic failures by uncovering invisible hot spots. The Ti90 and Ti95 feature a 3.5-in LCD screen, approximately 30 percent larger and a resolution 84 percent sharper than those of competing IR cameras. The...
