The linear brakes available on the market today usually function as static clamping units and are designed to hold axes safely at a standstill. However, people may remain under suspended loads during operation, maintenance or even during the production process, without the load transfer having been made onto the mechanical linear brake. If the drive were to fail complete...
Moreover, when combining series “SS” with Miniaction 300, designed by Mini Motor to operate both electrical asynchronous motors and brushless AC (BLAC) with power up to 0,75 kW, the highest flexible application is granted. Both motor and reducer are stainless steel to give utmost corrosion-proof and hygiene. Produced mainly for the most difficult applications, the gea...
The open circuit piston motor offers reverse circuit functionality without external valves — a hydraulic system product for mobile equipment applications. With wider product options, the RDM can be designed to meet individual needs of customers, increasing function and value. The RDM enables customers to achieve up to 10 percent power savings, a 15 percent average reduct...
The new high-dynamics H-860KMAG Hexapod is based on the PIMag® Voice Coil magnetic drives also developed by PI. The special design with flexure joints and contact-free magnetic drive principle has neither frictional nor rolling parts for guides and joints. It allows for zero-play positioning without mechanical noise in the drivetrain. The voice coil actuators work silent...
Oriental Motor is pleased to introduce our new 1.8° and 0.9° PKP Series 2-Phase stepper motor, the leading stepper motor in the market, now preassembled with new Oriental Motor Original Encoders. The new Original Encoder PKP Series is a complete product line introduction that includes both bipolar and unipolar motors. Specifications for the Oriental Motor Original Enc...
Oriental Motor USA is pleased to announce the BXII Series Brushless Motor and Driver Package. The BXII replaces our popular BX Series and now offers an all new driver incorporating a built-in controller with all the features necessary for speed control, position and torque control. The BXII Series now provides the highest level of speed control, up to 4,000 r/min with...
The new DMC-30019 is a single-axis controller based on architecture from Galil Motion Control, Inc. “Galil makes high end controllers that are widely used within areas like semiconductor, medtech, automation, optics and research” says Olle Lindkvist, Marketing Manager (PiezoMotor). “Engineers worldwide can now benefit from familiarity of the Galil control interface w...
New Universal Mounting Brackets allow fast, easy installation of AEGIS® iPRO, AEGIS® iPRO-MR, and AEGIS® WTG Bearing Protection Rings on large motors. Specially designed brackets attach to iPRO or WTG Rings with screws and have slotted legs (for mounting to motor) that accommodate bolt circles from 2.64” to 7.79” in diameter. Brackets are provided with 1/2”, 1”, and 1-1...
These new high-torque, zero-backlash gear units have an ultra-flat configuration and feature a large cross-roller bearing with high-moment stiffness. Complete with a housing and precision output bearing, Harmonic Drive®gear units are lightweight and extremely compact. The CSF-2UP gearheads are ideally suited for robots or manipulators requiring an ultra-compact solution....
Incorporating the ACM motor into a wide variety of equipment is possible because of its compact design. Available in a wide range of sizes and cooling options, there is an ACM motor to fit any need. By using iron-core technology, the ACM reduces cost and increases force compared with ironless direct-drive solutions. In addition, these motors experience low cogging du...
The new ECX brushless motors are quiet and feature very high efficiency. These brushless drives are ideal for use in hand-held surgical tools and industrial spindles. With a few clicks of your mouse you can configure your drive online and place your order. With maxon motor’s configurator, it is easy to put together a customized DC motor – including gearhead, encoder a...
Haydon Kerk has over 35 years of experience in the design of anti-backlash technologies and precision lead screws. Its new Micro Series ZBM nuts utilize a special nut thread system that, when combined with a radial force, provides simple backlash compensation. Initially designed for the optics-focusing market, the ZBM nut performs well in applications in which precise,...
Southco, Inc., a global leader in engineered access solutions, has added a sealed version to its successful C2 Lever Latch product line that provides the same consistent compression and vibration resistance as the standard C2 Series, but features a sealed design that meets NEMA 4 and IP65 standards for water and dust protection, making it suitable for use indoors and out...
The actuator combines a high precision Harmonic Drive® gear component with a pancake brushless servo motor. An incremental or multi-turn absolute encoder is integrated to provide high resolution velocity and position feedback. The large cross roller output bearing allows heavy loads to be mounted directly to the actuator without the need for additional support. K...
Designed with High Energy Magnetic Laminations, these components exceed the most rigid performance requirements. Our rotors are stacked and skewed utilizing highly designed stacking tools and skew fixtures. ARC’s in house machining capabilities enable us to grind/machine rotor castings to any required size and tolerance. Speed and torque are tailored to individual requi...
These systems utilize precision planetary reducers with an integral output housing and outboard bearing to provide a rigid support to the output pinion. Typically, reducers with output flanges are limited in the forces they can transmit by the tilting moment that the output bearings can handle. By adding an output bearing housing, this limitation is removed. Also, th...
The gearhead incorporates a Harmonic Drive® gear component into an integral housing. In addition to the hollow shaft, the gearhead also features a high capacity cross roller bearing and output flange to mount the load without the need for additional support bearings. Harmonic Drive® SHG series gearheads are improved, high torque version of the SHF series. All torque ...
The iron-core internal rotor drive is available with a diameter of 40 mm and delivers up to 234 mNm of torque. When it comes to powerful movements, maxon delivers with its EC-i 40 High Torque series of DC motors. The Swiss drive specialist presents three powerful iron-core internal rotor drives. The drives have a diameter of 40 mm and are equipped with an innovative ...
There are three stack lengths in the series with peak torque ranging from 8.5 up to 16.9 Nm (75 up to 150 lb-in) and rated speed up to 1000 RPM. The standard winding voltage is 48 V. The Megaflux MFH170i is designed as a rotary actuator ready for use in semiconductor equipment, automated test equipment, scanners, gimbal systems and similar applications where a comple...
G-LSQ gantries are based on the robust and versatile LSQ Series of linear stages, which offer various travel ranges from 150 to 450 mm per axis, and speeds up to 330 mm/s. These gantries are designed for multi-axis applications that require additional support for heavier loads, or access to the area under the system. They can support loads up to 18 kg, and the couple...
The brushless DC servo motor, measuring 32 mm in diameter and 74 mm in length, has massive continuous torque of 165 mNm. Surprisingly, it weighs in at just under 320 g, which is half the weight of conventional motors with comparable power. The four‐pole brushless DC servo motor is ideal for applications in which high power and dynamic start/stop operation with the...
The EC044A Series is designed with three motor lengths and 24 winding variations to suit most every project. Custom lengths and windings are available to further maximize exacting end-product requirements. EC044A motors have use in scanning and winding applications, pump and compressor products, medical equipment, and industrial automation products. The Series’ com...
Voice Coil Linear Motors and Flexure Guides for Reliability and High Speed The hexapod is driven by non-contact PIMag voice-coil linear motors and guided by frictionless flexures. The absence of conventional bearings based on rolling elements reduces noise, and provides basically unlimited service life because the zero-wear flexures and motors require neither maintenanc...
Inspired by market demand for a modular, standardized rack and pinion system capable of transferring higher maximum feeding forces, WITTENSTEIN has partnered the best in alpha mechanical expertise with superior engineering competencies to provide a reliable and high performing linear system for your design. The combination of gearbox, pinion and rack represents intellig...
Positional accuracy better than 1 arc-min and ±5 arc-sec repeatability is achieved while delivering up to 30,000 in-lb of torque. A robust cross-roller bearing allows mounting of large loads directly to the actuator without additional support. The SHA Series actuator also features a compact, hollow shaft configuration that allows design versatility for demanding appl...
This little powerhouse has applications in centers for miniaturized processing, hand-held tools and medical technology. When combined with planetary gearheads, many possible variations are available for applications in these key markets. With its modular construction, this new brushless DC motor is available in three performance classes: the cost-optimized EC 19 at 6...
These gearboxes are now available with Pittman brush and brushless DC motors and complement Pittman’s existing spur and planetary gearbox lines. The new products add 35 standard motor-gearbox family combinations to the Pittman offerings. The PLG planetary gearboxes deliver high torque loads with excellent efficiency and are small, durable, and quiet. These features ma...
The CFS mini gearhead series comes in four types; the 2XH-F, the 2XH-J, the 1U and 1U-CC. Each gearhead is designed for servomotor and specific applications. Gearhead Type 2XH-F This gearhead is designed to be coupled directly to a servomotor. The motor shaft is attached directly to the gearhead input element. The output of the gearhead is a flange. Gearhead Typ...
The curved racks and ring gears can be produced with straight or helical teeth, internal or external teeth, in a variety of tooth pitches, materials, heat treatments and quality levels. Ground gears can be produced up to 2.5 meter diameter and cut gears up to 6.0 meter diameter. Customers can provide their own drawings and designs, or ATLANTA can help engineer them ...
The SK 200E frequency inverter series is a centerpiece of the presentation. Featuring an integrated positioning function, the highest overload capability and broadest performance range (0.25 kW to 22 kW), these technologically advanced units are leading the field of electronics for distributed drive control. One prominently placed exhibit demonstrates their great flexibi...
Muncie Power’s Optimum Series is designed for durability, featuring a rigid pump design for long product life and maintained performance. Available in three frame sizes (W, X and Y) and tandem or triple configurations, the Optimum Series possesses flow ranges from 6-63 GPM at 1000 RPM and pressures of up to 4350 PSI. With its patented OPTI-GRIP technology, the Optimum S...
Engineered for continuous operations, the high-flow strainers -- including the MCS-500 and MCS-1500 -- are designed to conserve valuable process water while optimizing plant performance. The MCS series of strainers feature fast-cleaning actuation that eliminates the need for dynamic seals. This technology provides quick and easy access for maintenance, minimizes potentia...
The engine is said by Deutz to be the optimum solution for this application due to its power, durability, reliability and low fuel consumption. However it added that a special variant had to be developed for use by Terex due to the limited space available for the engine. Deutz engineers combined the slim agricultural machinery variant of the TCD 3.6 with components fr...
The full spindle bore of the lathe can be utilized for thru-hole work and long jaw travels provides more clearance for through feeding pipe. Features of these large bore air chucks include self-contained construction that allows these pneumatic chucks to be installed on the front and back of the lathe spindle. Extended jaw stroke for processing pipe with upset ends an...
Kurt Manufacturing introduced its DoveLock™ dovetail vise featuring 5-axis workholding for advanced machining operations. The DoveLock™ dovetail vise provides 4,000 lbs of precision clamping force, holding parts without distorting the workpiece while providing access to 5 surfaces of the workpiece. The DoveLock™ dovetail vise is built from pre-hardened 4140 steel, ens...
