DDTOP MLT series magnetostrictive level transmitter

MLT magnetostrictive level transmitters is designed according to the magnetostrictive principle, which is a highly accurate, respond fast, good reliability, long life, smart structure level measuring instrument.

Magnetostrictive level transmitter adopts two-wire system 4-20mA with HART for level measuring, which is widely used in the applications of petroleum, chemical, food , metallurgy and so on.

Power supply: 9 ~ 28V DC

Output signal: 4 to 20mA+HART

Range: 40mm ~4000mm

Probe diameter: Φ12mm

Operating pressure: ≤5.0MPa

Medium temperature: -40℃ ~ +160℃

Ambient temperature: -40℃ ~ +80℃

Accuracy: ±1mm

Resolution: ≤0.1mm

Temperature influence: ≤±0.01%/℃

Min. density difference: 0.5g/cm³

Wetted material: 316L, Hastelloy C-276 (or on request)

Process connection: G1/2″, standard flange (or on request) or others

Power supply inlet: M20×1.5 (female thread)

Explosion-proof: Intrinsically safe Ex ia IIBT5/T6 Ga;

Explosion isolation Ex d IICT3/T6 Gb

Protection class: IP67

Order requirements

a. If process connection is flange connection, you must provide the

following parameters:

Nominal diameter\Pressure class\Flange standard (Indicated in the

selection);

b. Confirm the bottom fixed mode: none, heavy punch or hook;

c. According to the corrosivity of the medium to be measured to

determine the probe rod material;

d. If you need to order the float, also need to provide the density range

of the measured upper medium and lower medium, so that we can

help you to select the float model.