#Product Trends
LD insert type Electromagnetic Flow Meter--DDTOP China
LD electromagnetic flow meter is a kind of electromagnetic measuring flow instrument, used to measure all kinds of the volume flow of conductive liquid. This product is mainly used in petrochemical, steel, electric power, metallurgy, textile, food, pharmaceutical, paper making industries and municipal environmental protection, water conservancy and other fields.
1.parameter
Suitable diameter: ≥80mm
Sensor material: Stainless steel(1Cr18Ni9Ti)+ Polytetrafluoroethylene(PTFE)
The diameter of sensor probe: φ37mm
The sensor inserts the depth of pipe:1/8D and≤40mm(D is tube diameter)
Operating pressure:1.0MPa,1.6MPa,4MPa,25MPa(special)
Fluid temperature: ﹣40℃-100℃,100℃-180℃(high temperature)
2 The converter parameter
Measure range:flow rate 0.1-10m/s,each diameter flow= Tube cross-sectional area×flow rate
Accurcy class:0.3、0.5(flow rate≥0.5m/s),1.0(flow rate<0.5m/s),2.0(flow rate<0.2m/s)
Electrical conductivity: >5µs/cm
Output signal:4-20mA,load≤750Ω;0-100Hz output pulse, with power24V, >10mA;RS485;
4-20mA+HART
Supply power:220VAC±10%,50Hz±1Hz;24VDC±10%
Power consumption: <7W
Explosion proof: Exd(ia)iaqⅡCT6,Exd(ia)iaqⅡBT4
Housing protection: integrated:IP65; Split type:sensor IP68、converterIP65
Ambient temperature:﹣25℃-60℃(Explosion proof to50℃)
Ambient humidity: ≤85%RH(20℃)
Electrical interface size:M20×1.5,1/2NPT(outside diameter of cableφ6-φ10)