#Product Trends
LD Smart Electromagnetic Flow Meter--DDTOP China
Main technical parameters
1. Sensor parameter
1.1Flange connection (LD1)
Suitable diameter: DN15-DN1000, other diameters are non-standard, according to user request
Measuring pipe lining material: F46 (FEP Teflon), P0 (polyolefin), PUR (polyurethane)
The electrode material: 316L, Hc(Hastelloy C),Hb(Hastelloy B),Ta()
Operating pressure: DN15-DN80 diameter: 4.0Mpa (standard)
DN100-DN150 diameter: 1.6 Mpa(standard)
DN200-DN1000 diameter: 1.0Mpa (standard)
More than the pressure standard is non-standard type, according to user requirement order other flange standard
Fluid temperature:F46lining:﹣40℃-180℃,P0lining: ﹣20℃-80℃;PUR lining: 0-50℃
Technology of connecting flange:Flange standard of this book is HG/T20592-2009,or according to user requirement order other flange standard.
Grounding ring material:304、321、316、Hc、Ti、Cu
1.2 Insert-type(LD2)
Suitable diameter: ≥80mm
Sensor material: Stainless steel(1Cr18Ni9Ti)+ Polytetrafluoroethylene(PTFE)
The diameter of sensor probe: φ37mm
The sensor inserts the depth of pipe:1/8D and≤40mm(D is tube diameter)
Operating pressure:1.0MPa,1.6MPa,4MPa,25MPa(special)
Fluid temperature: ﹣40℃-100℃,100℃-180℃(high temperature)
2 The converter parameter
Measure range:flow rate 0.1-10m/s,each diameter flow= Tube cross-sectional area×flow rate
Accurcy class:0.3、0.5(flow rate≥0.5m/s),1.0(flow rate<0.5m/s),2.0(flow rate<0.2m/s)
Electrical conductivity: >5µs/cm
Output signal:4-20mA,load≤750Ω;0-100Hz output pulse, with power24V, >10mA;RS485;
4-20mA+HART
Supply power:220VAC±10%,50Hz±1Hz;24VDC±10%
Power consumption: <7W
Explosion proof: Exd(ia)iaqⅡCT6,Exd(ia)iaqⅡBT4
Housing protection: integrated:IP65; Split type:sensor IP68、converterIP65
Ambient temperature:﹣25℃-60℃(Explosion proof to50℃)
Ambient humidity: ≤85%RH(20℃)
Electrical interface size:M20×1.5,1/2NPT(outside diameter of cableφ6-φ10)