#Product Trends
NEW: test adapter by GOSSEN METRAWATT
Single and 3-Phase Test Adapter for Testing for the Effectiveness of Protective Measures at Electrical Charging Stations with the Profitest Master,
Simulating Fictitiously Connected Electric Vehicles and Simulating the
Current-Carrying Capacity of Cord Sets per IEC 61851-1.
- Vehicle Simulation (CP)
Vehicle states A through E are selected with a rotary switch.
- Cable Simulation (PP)
The various codings for charging cables with 13, 20, 32 and 63 A, as well
as “no cable connected”, can be simulated with the help of a rotary switch.
- Fault Simulation
Simulation of a short-circuit between CP and PE by means of a rotary switch
- Indication of Phase Voltages via LEDs
Depending on the charging station, either one or three phases can be active.
- Vehicle Simulation (CP):
States A, B, C, D and E can be simulated in accordance with IEC 61851. The
various vehicle states are selected by means of a rotary switch.
State A No vehicle connected
State B Vehicle connected, but not ready for charging
State C Vehicle connected and ready for charging without venting
State D Vehicle connected and ready for charging with venting
State E Error – short circuit between CP and PE via internal diode
Cable Simulation (PP)
The various codings for charging cables with 13, 20, 32 and 63 A can be simulated. It’s also possible to simulate the “no cable” state.
The various charging cables are simulated by connecting different resistances between PP and PE with the help of a rotary switch.