Methods of handling common problems of universal testing machines

after-sales service engineers to provide a common problem of the treatment to us

Methods of handling common problems of universal testing machines

Universal testing machine in the market has been widely used, the use of the process will inevitably encounter some operational problems, the following is by the HAIDA test equipment company after-sales service engineers to provide a common problem for the treatment, we hope to help yours.

1, the machine just after the computer prompt box shows the overload.

Approach:

1) Check the computer in the test machine between the host line is connected to normal

2) When the sensor is online is not the wrong choice

3) Whether the sensor has collided during the operation of the keyboard or the last experiment

4) whether the software has been used before the calibration function

5) Check whether the calibration values, calibration values ​​or other information in the hardware parameters have been changed manually.

2, the test machine host power is not bright, the device can not move up and down.

Maintenance method:

1) whether the power line is normal

2) whether the emergency stop light is off

3) The supply voltage is not normal

4) The fuse on the machine plug is not blown.

5) patiently waiting for 15s, because the host boot need self-test, about 15S time.

6) the test machine beam is not in the right place to move the space