Add to favorites

#Product Trends

OPMUX v12.0 Ultrasonic Multiplexer (for NDT)

Each channel has separate pulser & receiver.

MUX can operate with transducers of the resonant frequency of 0.5MHz - 25MHz and any impedance.

Depending on the version MUX has from 4 to 35 channels. Each channel can operate

as a transmitter and as a receiver. Only one transmitter can operate at the same time.

Transmission and reception can take place on different channels - for example,

we transmit by the transducer connected to the first channel and we receive

the signal from the second channel transducer.

MUX is equipped with a memory, which contains preset sequence of active channels (i.e. the sequence of addresses of transmitters and receivers for subsequent triggers).

MUX has got one output signal. Transmitter with which you want to record the signal is selected by the internal multiplexer. Then the signal is fed to an amplifier with filter.

The device is configured via the serial interface (RS232 standard).

The device is powered by a 12V DC. The device is equipped with a fuse, short circuit - and thermal protection in circuits of transmitters.

Input trigger reacts even on very short pulses (<400ns) as TTL - levels.

MUX can be equipped with additional input and output peripherals:

• Analog Input 0V-10V

• Analog Output 0V-10V

• Four relays to control an external load

• Two digital inputs for buttons connecting.

Details

  • PBP Optel sp. z o.o.

    Keywords