Hand-pumps for pressure generation suitable for use with digital manometers

• Pressure generation: from vacuum (negative pressure) up to 700 bar

• Connection for reference pressure meter (pump is supplied without reference pressure meter)

Hand-pump K/P Pressure generation: -0,85…25/-0,95...40 bar

Medium: Air

Negative pressures/vacuums and pressures of up to 25 bar (max. 40 bar) can be generated with this pneumatic hand-pump.

Thanks to the fine adjustment valve (which is integrated in the pump) and the relief valve, a calibration pressure can be set accurately and quickly.

This handpump is therefore highly suitable for testing manometers and pressure transmitters.

The pump is supplied without the carrying case, which is available as an option.

Weight: ≈1,1 kg Dimensions: 240 mm x 170 mm x 50 mm

Hand-pump HTP1 Pressure generation: 0…700 bar

Medium: Oil or Water

Pressures of up to 700 bar can be generated with this hydraulic hand-pump.

Hydraulic oil or distilled water can be used as pressure medium (the pump is supplied without fluid).

The reservoir has a capacity of approx. 1 dl (100 ccm), thus allowing the pump to be used with larger dead volumes. The hand-pump with its integrated fine adjustment and relief valve

is highly suitable for testing manometers and pressure transmitters.

The pump is supplied complete with accessories (hose, adaptor, etc.) in a stable carrying case.

Weight: ≈1,7 kg Dimensions: 255 mm x 176 mm x 70 mm

The reference device for accurate measurement of the actual pressure is screwed directly

onto the hand-pump and is available as an option.

The matching reference devices for the pumps are listed below.

Please note the pressure range required for the pump:

K/P hand-pump = -1…30 bar HTP1 hand-pump = 0…700 bar

Carrying Case

Solid carrying case with interior foam cutout to fit one pump with manometer attached.

Additional compartments for tools, adapters etc. are provided