Mud Pump pressure gauge

Mud Pump Pressure is extremely important to the drilling process. The Mud Pump Pressure Gauge enables the driller to monitor the pressure while drilling. Any unusual change in pressure will alert the driller of down hole problems. Pressure too low could indicate washed out pipe or bit nozzle, loose joint or broken drill string, worn pump packing or liners, or lost returns due to formation breakdown. Pressure too high could indicate a plugged drill bit or an increase in mud density or viscosity. Reliable indication of mud pump pressure provides an early warning of circulation problems, enabling the driller to make corrections avoiding major problems.

Specifications

1. Model F Measurement range: 1, 000, 2,000, 3,000, 5,000, 6,000, 10,000, 15,000, 18, 000, 23,000 full of range PSI etc.

2.Model D Range: 1, 000, 2,000, 3,000, 5,000, 6,000

3. Accuracy grade: 1.6

4. Linking thread: 2 inch NPT male, 2 inch NPT female.

5. Case: Fluid filled

6. The use of the Gauge is allowed under the environment with the temperature ranging for -40~+50 Celsius degree.

MUD GAUGE

Note:

Install the gauge vertically and keep the nearest to the measured unit

Please consider temp. Error when ambient temp. Deflects from 20(+/- 5) Celsius degree.

Loosen oiling screw to release inner pressure in operating.

Measurement range, Linking thread etc especially that is customized