inclinometer in crane

tilt sensor for engineering machinery

In the past, drilling and blasting method driving mode widely used in mountain tunnel hard rock drivage, however, in the same conditions, the whole section tunnel boring machine driving speed drilling and blasting method is 8 times the left and right sides, with efficient, fast, high quality, safety, economy, environmental protection etc. Hard rock tunnel boring machine driving principle for through the knife rotating, the oppression hob high pressure acting on the tunnel working face. Hob in working face in rotation, loose surrounding rock. Digging down the stone slag is edge scraper collect and through the belt conveyor ballasts along the machine delivery to the end, and finally ballasts were loaded into the car carrying out.

A big difference, when driving length is longer, the small gap might cause the later trouble, so tunnel boring machine to Angle sensor accuracy very high. Not only that, the tunnel humidity, temperature difference is large, so the protection level has temperature compensation has certain requirements. Due to the Angle sensor is full section tunnel boring machine of an important part of all parts. So shenzhen rui Finn technology co., LTD. For machine research and development production Angle sensor, and has been used in the tunnel boring machine control system, and it can be used to measure the shield machine cantilever tilt Angle, but also can be used to measure the mining of the cavity Angle, through a series of complex arithmetic to calculate the mining deviation distance etc data, to the correct orientation plays a very important role.