NEW: Space-saving angle solenoid valve, DN 17

The angle valve, series 01.017.115, is ideal for applications requiring larger flow in a small space. With a Cv value of 70 l/min @ 1 bar, a high flow rate is achieved in spite of the reduced size. A further advantage of the valve is its short closing time, allowing a precise control, for example when filling tanks. Despite the high flow rate and the short closing time, the valve fully meets the requirements of EN 60730 in terms of water hammer.

The normally closed angle valve, is ideally suited for use in drinking water applications. The valve is made of glass fibre reinforced polyamide and stainless steel and is suitable for hot water up to 90 °C. The materials are KTW/W270 approved and 100% lead-free. Certified variants according to UL, VDE and WRAS will also be available shortly. An ACS approval can be done on request.

The angle valve is available with a G ¾ threaded inlet and either a G ¾ thread or a 21.5 mm nozzle at the outlet. The valves are suitable for a pressure range of 0.3 - 10 bar.

Coil systems for common voltage and frequency ranges are available. The DC or AC operation has no effect on the hydraulic behavior.

Characteristics:

• servo-controlled

• normally closed (NC)

• solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4x90°

• suitable for hot water up to 90 °C

• similar performance for alternating or direct current

• long term performance capability

• optimized water hammer characteristic by low noise emission according to EN 60730

• high operating safety by the use of high quality materials and 100% final testing of the products

Applications:

• steam appliances

• dental appliances

• hot / cold drink dispensers

• industrial appliances

• air conditioning

• agricultural implements

• pollution equipment

• temperature equalisers

• dish washers

• ice machines

• washing machines

• water treatment