Add to favorites

#Product Trends

manual testing machine for spring extension and compression|ATH 50-500N

spring extension and compression tester|ATH 50-500N

Product Description:

The ATH spring pull pressure test stand is specially design for measuring the stretches and compression distortion value of spring, and the load relations characteristic.

It is applied in measuring the working load of spring when it on the certain length stretched and compressed.

Functional Features:

-Liquid crystal display(English);better Human Machine Interface(HMI)

-High precision and resolution

-Three kinds of measurement units can be selected(N,Lb and Kg);inter-conversion is available

-The user can independently set up acceleration of gravity of the place of usage.In this way,the testing and unit conversion would be more accurate

-99 sets of test data can be stored;the user can directly look over,store and delete data in the machine

-The user can freely shift among the following three patterns:Real-time and peak-value patterns and the pattern of automatic peak value

-It has be function of client setup and free setup of upper and lower limits(corresponding to audible and visual alarms),storage value,holding value,automatic storage time of peak value,automatic shutdown time (non-operation),etc

-Judgment of acceptance or rejection of test data to be printed and stored,maximum value minimum value and mean value(only for tape printing machine)

-MODBUS-RTU standard agreement is adopted for communication;USB interface is adopted for better connection with configuration and PLC connection.

Parameter

1:Test spring max unsupported length: 10N~30N is 100mm, 50N~500N is 150mm, 1000N~5000N is 200mm

2:Max distortion value stroke: 10N~30N is 70mm, 50N~500N is 90mm, 1000N~5000N is 150mm

3:Distortion value resolution eH: 0.01mm

4:Distortion value display interface: Five figures and “-” position liquid crystal display;

5:Max working load: According to measuring range;

6:Load resolution eP: 0.02N

7:Platen diameter: 49mm

8:Shows value error: ±1%

9:Power source: Exchanges 220V-50Hz

10:Power: 13W

11:Operating temperature: 20±10℃

12: Storage and transport temperature: -27℃~+70℃

13:Relative humidity: 15%~80%RH.

Details

  • Wenzhou Tripod Instrument Manufacturing Co.,Ltd.