The new DC-UPS with Ethernet interface: CBI60W Series

The CBI60W series with integrated Ethernet SNMP, Modbus TCP and HTTPS protocols can be connect to gateways and switches, providing easy access to battery status, DC-UPS functions and all application data.

The new DC-UPS line with Ethernet interface is composed by two models: CBI6012A (12V 5A) and CBI6024 (24V 2.5A) with 1 Phase AC Input (90-305VAC).

These models are Protection Class II, designed also for the building automation field.

They use switching technology with microcontrollers and optimize the loading and unloading times of the accumulator without a deep discharge, the switching from the battery to the charger without any interruption, automatic protection without fuse against the reserve polarity, short circuit and overload and overvoltage.

The CBI60W series has different charging profile for Lead Acid, AGM, GEL, NiCd, NiMh, Li-Ion and LiFePO4 battery technologies.

The Ethernet SNMP, Modbus TCP/IP and HTTPS interfaces allows the users to access to internal DC-UPS parameters remotely trough IoT equipment. A number of important operating parameters are sent on real-time.

The CBI60W Series has its own internal webserver with the possibility to connect by using their IP Address.

Using the IP Address, the user will manage the configuration of the DC-UPS through Adelviewsystem interface.

The load output is totally configurable and the CBI60W Series allows the user to enable and disable the output load based on the type of application.

• Switch OFF the load through a command via Webserver or external push button

• Switch OFF the load as soon as the AC Mains is present

• Switch ON the load as soon as the AC Mains fails (emergency lighting)

The Relay contacts can be freely configured according to the user's needs. It is possible to configure:

• Fault Relay

• AC Mains Relay

• Rectifier Relay

• Buzzer acoustic alarm