#Product Trends
AGME tube end forming machines
The operation performed by this machine is the links joining to the tube by a tube end forming process. For this purpose, AGME develops hydraulic machines with two tube end forming units, two slide chariots, one assembled part ejection chariot and a fixture lubrication mechanism.
Each tube end forming unit is composed of one AGME Hydraulic Press PH-50 that performs up to 50 tons force, one set of tube holding and assembly clamps, one fixture for positioning the links, one set of fixtures for the tube and one device with three positions to assemble the links and to perform the tube end forming on both sides of the link.
After the manual loading of the tube and the links into the fixture, the cycle starts and the tube is centred and held with the clamps. Then, the first tube end forming operation between the clamps and the links, is performed. After this, the second tube end forming process is done between the link and the fixtures. Finally the assembled part is removed.
