Add to favorites

#Product Trends

AGME special purpose machines for joints flaring and greasing

In order to insert and grease the joints, this AGME special purpose machine incorporates the following ítems:

- A presentation fixture for the interior joint with a floating device (+/- 50 Kgr.)

- A nozzle with 12 greasing points and a 60 litre deposit

- Pressure regulator and dosing valve

- Superior handling device with clamps

- Exterior handling device for inserting the exterior joint on the interior joint.

For handling the tool, this customized machine has a vertical clamping device and also a turning unit.

Furthermore, the joint components are fed and flared with the following ítems:

- Caps feeding vibrator and linear transporter

- One-by-one selection device

- Caps transport device on the clamp

- Maintenance lungs with 2.000 units capacity

- One AGME MPH-10 hydraulic press to perform the caps´ flaring, 150 mm course.

- One Siemens automata to control the process

The assembly process is performed in the following way. After a manual feeding of the interior joint on the fixture and the exterior joint on the clamp, the clamp moves forward automatically to the greasing position where the greasing is also automatically done. Then the exterior joint is introduced on the interior joint and the subassembly is placed on the fixture by a handling and turning unit. After this the cap is fed automatically on the subassembly and the automatic flaring process is done. Finally the unloading is performed.

Details

  • AGME Automated Assembly Solutions

    Keywords