Digital impeller anemometer type FVAD 15-H

Impeller anemometer with high accuracy for numerous applications

The precision measuring heads and the sensor shaft of the new impeller anemometers are made of aluminum or stainless steel and are therefore suitable for many mobile or stationary applications. At the same time, the anemometers offer high measuring accuracy.

- Measuring ranges from 0.3 to max. 40 m/s

- Extended measuring ranges from 0.2 to max. 120 m/s on request

- For measurement in air, gases or also liquids

- For ambient temperatures from -20 to + 125 °C or - 40 to +260 °C

- Maximum resolution 0.01 m/s !

- Additional version with direction recognition

Special features:

Each impeller is adjusted individually. The multi-point adjustment is stored in the connector plug. To improve the high measuring accuracy even more, the low dependence of the measured value on the density can be compensated. The programming is stored in the connector plug. The impeller anemometers are connected via a digital ALMEMO® D6 connector and can thus be easily plugged into all ALMEMO® V7 measuring instruments and data loggers as well as into older instrument versions with digital input.