Flexibility and dynamism in one click: Algodue Rogowski Coil

Rogowski Coil is a flexible current sensor that can be used in combination with portable or fixed instruments for AC measurements.

Fast to install, flexible, and so light that can be hanged to the measured conductor, the coil is ideal for both new and retrofitting installations, and where traditional current transformer are an inadequate solution. The absence of magnetic core prevents the sensor, resulting in high linearity even at high currents.

KEY FEATURES OF ALGODUE COILS:

· installation in one click;

· cross coil section: 7, 8, or 12mm according to the model;

· with or without built-in integrator according to the model;

· measurement from few mA to several kA;

· UL 61010-1, UL 2808;

· totally shielded.

GENERAL CHARACTERISTIC:

· easy installation in systems with limited space, switched-on plants, and irregular and bulky conductors;

· current detection up to several kA with the same coil;

· accuracy better than 1% even close to junction point;

· non-intrusive, no power drawn from the main;

· high linearity, no damage by overloads.

· fully shielded to avoid external conductor interference;

· customizable according to specific requirements.

ALGODUE STANDARD MODELS:

MFC140

Coil length: from 150 to 500mm

Internal diameter: from 40 to 150mm

Coil cross section: 7.2 ±0.2 mm

Cable length: Standard 3m

Nominal output values (RMS values): 100mV/kA @ 50Hz, 20mV/kA @ 60Hz, 333mV/FS;

Optional: built-in integrator, accessory to secure the coil to the conductor, UL certified (listed)

MFC150:

Coil length: from 250 to 3000mm

Internal diameter: from 50 to 940mm

Coil cross section: 8.3 ± 0.2mm

Cable length: Standard 3m

Nominal output values (RMS values): 100mV/kA @ 50Hz, 120mV/kA @ 60Hz, 333mV/FS.

Optional: built-in integrator, UL certified(listed or regornized).

MFC190:

Coil length: from 300 to 3000mm

Internal diameter: from ~ 100 to 960mm

Coil cross section: 12.4 ± 0.2mm

Cable length: Standard 3m

Nominal output values (RMS values): 333mV/kA @ 50 Hz; 400mV/kA @ 60Hz.

Optional: UL certified (recognized)

Achieve a measuring system that is compact and effective while saving time and money,

CHOOSE ALGODUE COILS