Smoke extraction dampers ­ SEDS

EIS 120, 90 and 60

Smoke extraction dampers ­ single are shutters in s moke exhaust piping systems. Dampers are designed to remove heat and combustion products (e.g. smoke) from single fire compartment. The damper blade is operated by an actuating mechanism. The dampers can be installed invarious duct sizes with respect to the field of direct applications according with EN 1366­9.18

Smoke extraction dampers ­ single are designed to remove heat and combustion products (e.g. smoke) from single fire compartment according EN1366­9.

Smoke extraction dampers ­ single are designed for installation with horizontal blade axis. Back­to­back smoke exhaust duct has to be hung or supported so as all load transfer from the back­to­back smoke exhaust duct to the damper is absolutely excluded. To provide needed access space to the control device, all other objects must be situated at least 350 mm from the control parts of the damper.

Damper casings are made of galvanized plate without any other surface finish.

Damper blades are made of fire resistant asbestos free boards made of mineral fibres.

Fasteners are galvanized.