Brush Roller Solution For Copper Sheet Industry

Brush Roller for Copper Industry

The polishing and cleaning of copper sheets is generally arranged at the same time as pickling. Its function is to remove the reaction layer left by pickling on the surface of copper sheet and polish the surface of sheet. The modern continuous cleaning line is equipped with abrading and cleaning equipment. The high-speed rotating abrasive brush roller can polish the surface of strip evenly and stably under the support of the reverse pressure roller and with a large amount of clean water, which can achieve quite high surface quality. Currently, the abrasive brush roller has become a key tool on the copper and copper alloy strip cleaning machine.There are specialized manufacturers both at home and abroad to produce. Based on different copper alloy varieties, surface conditions and strip conditions, the key to ensure the abrading effect is to select the appropriate brush roller line diameter, abrasive grain number and hardness.

Currently, there are two basic forms of abrasive brush roller. One is a abrasive brush roller made by coating aluminum oxide and other abrading particles on nylon or nylon wires while the other is a abrading roller composed of abrasive grains added to non-woven fabric. The wire diameter of the brush roller suitable for abrading the surface of common copper and copper alloy strips is generally between 00.25〜0.35mm and the abrasive grain number is 500〜600 meshes. For strips with high surface polishing quality requirements, the non-woven cloth abrading roller with abrasive grain number of 1500〜2000 meshes and hardness of 4060 is generally selected. It should be pointed out that the higher the mesh number, the higher the cost of the abrading roller and that the shorter the service life is, the reasonable choice of brush roller, abrading roller and abrasive grain number should be made in line with the technical requirements of different products in production to decrease the production cost as much as possible on the premise of ensuring the surface quality of the strip.