NEW MACHINE! CUT DRILL NC

2-HEAD AND 2-AXIS EASY DRILL WITH PROGRAMMABLE SAW AND SPEEDY 3000

The company Apollo conceived this machine due to the huge number of customers’ inquiries received as they needed to drill bars with varying center distances on both the width and the length of the piece and of performing the cutting on the drilled bars automatically by simply setting a programme. In that way drilled and cut pieces are obtained in a single run through the machine.

The Cut Drill NC is equipped with a 3 mt long bar feeder, that by re-machining the piece another time can work with bars up to 6 mt in length. In this case we will also supply an inlet and outlet roller conveyor to bear the bars.

The max. size of the profiles that can be processed by the machine is 150x60 mm.

On the central machine body a motorized slide is installed for positioning the two drilling units. They can perform holes of max. 18 mm diameter on steel. Upon request one of these two units can be fitted with a lead screw in order to perform threads or with a bit that drills and taps in a single step, installed on a floating spindle.

The saw has a disk of max. 375 mm diameter with quick approach and adjustable cutting power.

The machine is equipped with a cooling pump for the bits and one for the saw disk. There is also a collecting tank which is divided in two parts (one for the scraps and the cooling liquid, the other where the cooling pump of the saw is put).

The drilling and tapping head is driven by a brushless motor on which the rotation speed of the tools can be programmed.

Each drilling head can have its own independent programme, thus allowing to perform holes at different and variable center distances.

The number of programmes is limitless because they can be downloaded on a USB stick delivered along with the machine.

Apollo will introduce this novelty at the next EuroBlech exhibition in Hanover (25th-29th October 2016).