Our suggestions to prevent metal hardness test blocks corrosion

Free you from removing rust from your hardness test blocks!

If the necessary precautions are not taken, metal hardness test blocks may suffer a problem which totally compromises their validity.

We are talking about the rust forming on test surface, one of the many chemical reactions that most closely concern metals.

We want to specify that each hardness test – Brinell, Rockwell or Vickers – requires a proportional and proportionate surface preparation. Therefore, generally speaking we can take into consideration all those external stresses that modify the degree of superficial adequacy of the test sample.

However, rust is definitely one of the most common problems that occur, and for this reason it is annoying to manage, although as we will see it is easy to prevent.

But how and why is rust formed on metal hardness test blocks?

Keep in mind that ferrous metals are subject to oxidative processes that generate corrosive phenomena if they are not properly protected.

As you may know, these phenomena cause a gradual degradation of the material, which results in an impairment of its properties.

This is not exactly the best for those instruments (i.e., hardness test blocks) which are used to verify the accuracy of hardness values detected by the instrument!

It is therefore good to know how this process takes place. Only the presence of water and oxygen can activate the process.

To be specific, the higher the electrical conductivity of the aqueous solution is, the faster ferrous material corrosion takes place.

This explains why, in the field of hardness testing, the main cause of rust forming is precisely the sweat released by the operator who handles metal test blocks.

You wouldn’t say that, would you?

Here are our suggestions to prevent metal hardness test blocks corrosion: discover it clicking below!