Add to favorites

#Product Trends

Vibrometer-balancer for the service and repair of fans

10) BALTECH GmbH - Vibrometer-balancer for the service and repair of fans

BALTECH GmbH - Vibrometer-balancer for the service and repair of fans

Devices of this class designed for the diagnosis, repair, and vibration monitoring of motors, compressors, exhaust fans, turbines, pumps, generators, fans and other rotary mechanisms of the type in operation.

Vibrometer-balancer is used to regularly maintain in good condition. In the production of any level, this device is capable of:

• Monitor current technical state equipment and its components in accordance with ISO-10816;

• Monitor the quality of balancing of rotary mechanisms and alignment of composite rotors;

• Contactless control of the rotary momentum, the implementation of dynamic balancing of mechanisms in place;

• Maintain a database DB vibrometry, forecasting the residual resource of the equipment, the timing of maintenance and repair.

Our offer.

Company BALTECH GmbH produces and offers its customers two such device.

New explosion-proof vibrometer-balancer BALTECH VP-3470-Ex.

This kit is so easy to use that even users without special training can quickly perform balancing equipment. Portable balancing machine is a modification of the previous vibration-balancing devices.

It is known that the imbalance is the main reason of increased vibration of rotary mechanisms, which leads to rapid wear of the bearing assemblies, degradation of lubrication, excessive noise, damage to the parts of mechanisms and rotary shafts. This dramatically reduces the efficiency of the entire unit. It is necessary to eliminate the imbalance, however, this operation is challenging. For its implementation requires skilled personnel and measuring equipment.

To simplify this task was created new explosion-proof vibrometer-balancer BALTECH VP-3470. Multifunction kit able to conduct the balancing in own bearings of various mechanisms and machines.

Possible BALTECH VP-3470-Ex.

A compact device capable of functioning in the following modes:

• Vibrometer, measuring velocity, acceleration, displacement, RMS value, amplitude, kurtosis;

• Measurement of the spectrum envelope;

• Measure along the route and vnemart;

• Tachometer;

• Phase meter.

New explosion-proof BALTECH VP-3470 can calculate (measure):

• The test mass;

• Weight and installation angle of the balancing mass;

• Temporary signals operating in the oscilloscope mode;

The device is designed for vibration analysis, dual-channel measurement, spectral analysis of signals, analysis (temporal, spectral) envelope of the high frequency component of the vibration.

There is the possibility of multi plane balancing (4 planes, 16, trial start), connect a regular strobe light, information transmission AT the BALTECH-Expert (you can configure the database DB according to the condition of the equipment of analyzing information, forecasting, systems and reporting) and management via PC with advanced capabilities for analysis.

Vibrometer-balancer BALTECH VP-3460.

Simple and easy to operate and is BALTECH GmbH. This device is a great assistant maintenance departments (mechanics, power engineers). He has an advanced electronic circuit and it is set AT the BALTECH-Expert. This gives the ability to control the information on vibration and temperature range (-55...+130)degrees. Connect a standard tachometers, and the use of two channels of vibration.

The possibilities of the instrument.

BALTECH GmbH can operate in the following modes:

• Tachometer by measuring the frequency with the rpm, and check the performance of the image sensor;

• Thermometer measuring the temperature (range (-55C to+130C) of the surfaces of solids and liquids;

• Phase meter and check the performance and quality of measurement of the phase angle, not entering into a balancing mode;

• Vibration analysis, automatically determining the frequency, carrying out manual frequency input, performing the switching harmonics and displaying the level on the 1-St harmonic and a common vibrational level;

• Vibration meter, measuring vibration velocity RMS (range 10-1000 Hz) and a double amplitude of vibration. 250 value of the readings the device can store and transmit to the database of your computer. It is also able to remember the temporary realization of vibration signal in order to process it later on a computer;

• Balancing performing dynamic balancing and setting the number of measurement points and the number of planes of correction.

As you can see, the device only lot. In addition, the multipurpose kit can perform the functions of the measuring unit for older models of balancing machines. Such machines are not equipped with measuring parts that allows them to calculate balancing mass.

In conclusion, we note that both instruments comply with ISO 10816.

Details

  • Lübeck, Germany
  • Romanov Roman

    Keywords