The new explosion-proof set BALTECH VP-3470-Ех

The new explosion-proof set for the vibration measurement and dynamic balancing BALTECH VP-3470-Ех

The new explosion-proof set BALTECH VP-3470-Ех is a modification of the previous portable vibration measurement and balancing instruments. The vibrometer- balancer BALTECH VP-3470-Ex with the BALTECH-Expert software is intended to monitor vibration levels and check technical condition of industrial equipment, as well as to perform the dynamic balancing of rotating units on site (in their own bearings).The application according to the EX marking (2Ex nA ic IIB T4 Gc X), IEC 60079-14-2011 is the electric equipment, used in explosion hazard zones on the basis of the Customs Union Conformity Certificate No. 0328050.

BALTECH VP-3470-Ex Features:

Simple procedure of measurement and calculation The main reason of the increased vibration of the rotating machinery is the unbalance, which results in increased vibration and wear of bearing assemblies. The unbalance leads to rapid wear of bearings, lubricant degradation, increased noise level, shaft damage, loss of the efficiency of the entire machinery. The new explosion-proof set BALTECH VP-3470-Ех allows performing the balancing of rotating units on site (in their own bearings).

The set has been developed by BALTECH for service and repair organizations. Today it is the best assistant for mechanics and power engineers on the market according to the price/performance ratio. The explosion-proof set BALTECH VP-3470-Ех has all the functions required to perform fast and effective on-site balancing.

BALTECH VP-3470-Ex Features:

Two channel vibration measurement and analysis (2 vibration

channels, 1 tach channel)

Vibrometer mode: overall vibration measurement (vibration velocity,

vibration acceleration, vibration displacement, RMS, amplitude,

excess)

Waveform measurement (oscillograph mode)

Spectrum analysis (vibration velocity, vibration acceleration, vibration

displacement)

Waveform and spectrum analysis of the envelope of high- frequency

vibration component

Phasemeter and tach modes

Multi -plane balancing (4 planes -16 points, trial run, dynamic

influence coefficient)

Trial weight calculation

Vector calculator

Calculation of weight and angle of installation of the balancing mass

Connection of the stroboscope

Transfer of the measurement data to the BALTECH-Expert software

for the database management (machinery condition monitoring,

vibration analysis,machinery life prediction based on trends, report

saving)