NEW: plate heat exchanger by Baode heat exchanger co.,ltd

Stainless Steel Alloy 316 Plates Steam Plate Heat Exchanger with Carbon Steel Nozzles

Working principle

Channels are formed between the plates and the corner ports are arranged so that the two media fl ow through

alternate channels. The heat is transferred through the plate between the channels, and complete counter-current

flow is reated for highest possible efficiency. The corrugation of the plates provides the passage between the plates,

supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.

STANDARD MATERIALS

Frame plate: Mild steel Epoxy painted

Nozzles: Carbon steel

Metal lined: Stainless steel, Titanium

Plates: Stainless steel Alloy 316 or Titanium

A great advance on conventional PHEs

Optimized plate design

The BS Series solves two main problems that occur when conventional plate heat exchangers (PHEs) are used

as steam heaters. The first is that when water is heated over a relatively wide temperature difference, e.g. from

10 to 70°C (50 to 158°F), the high steam velocity causes erosion and noise problems. The second is that when

high water flow rates are used when heating water only a few degrees, the PHE has to be oversized to keep the

secondary side (water) pressure drop within reasonable limits. Both of these drawbacks are now eliminated in

the new BS Series of PHEs by a unique plate geometry that allows problem-free heating over narrow and wide

temperature ranges.