Tips for installation of wood CNC Router

Tips for installation of wood CNC Router: 4. Installation details of accessories 5. Test the machine

4.1 Installation of vacuum pump

1. Install the vacuum pump on a flat surface and fix it with bolts through the bolt holes on the bottom corner without special foundation or chassis.

2. Wrap the pipe joint of the filter with sealing tape several times and screw it on the motor body above the check valve. Make sure the tightness of the connection between the two.

3. Inject water from the water inlet until water flows out of the water outlet. After using for a period of time, the water volume will decrease and the water temperature will increase, so the operator needs to pay attention: add water frequently to the water outlet overflow and the water temperature does not exceed 80 degrees Celsius. It is recommended to connect the tap water pipe to the water outlet, and the water outlet or both can circulate to ensure sufficient water. Note: Do not run the vacuum pump dry

The direction of gas in and out and the direction of rotation around the pump have been marked with arrows on the vacuum pump.

4.2 Installation of vacuum cleaner

1. Please installation according to the diagram outside the box.

2. Connect the three-phase power, after the start, the dust bag must be opened or the motor reverses. It can be solved by arbitrarily switching two of them.

5. Test the machine

After the installation and inspection of the complete machine and components are completed, the machine switch can be turned on to make the standby device be turned on. Open the vacuum hood and feel the suction of the two pipes when reaching into the hand; if the head is reset, if it moves up and down, left, right, up and down normally. This proves that the machine can run normally.

The above is the installation process and attention details of the engraving machine that we talked about in this article. I hope it will help you when installing the machine. Next Blue Elephant will continue to update your knowledge about the operation and maintenance of the machine, follow us to learn more.