New display for the BlueInOne gas analyzer

For all the BlueInOne gas analyzers there is a convenient additional display available now. It shows the current measurement data of the Co2 and O2 concentration. So you have the present measurement always directly in view. The display is simply connected via an up to 5 meters long data cable to the analogue 4-20mA output of the BlueInOne analyzer.

The BlueInOne are gas analyzer for the monitoring of bioprocesses and fermentations. The devices make the parallel analysis of O2 and CO2 in real time possible. The BlueInOne can be connected to any size of fermenter from the benchtop to the industrial production scale. The analyzers allow the creation of Golden Batch profiles or the determination of biomass in a process or the automatic calculation of vital process indicators like the CER, the OUR and the RQ. Via the available MODBUS OPC server all the data from the BlueInOne can be provided to all process lead systems of all fermenter-producing companies.

The new display is a practical upgrade to any BlueInOne. It is very easy to place close to the gas analyzer. Magnets at the backside of the housing of the display make the mounting easy and convenient. The display also has got a 4-20mA port, which passes the analog signal from BlueInOne. Thus, no ports are blocked by the display. In addition, the display has a button to perform a 1-point calibration. Thus, the calibration can also be started very simply, if the BlueInOne is not easy to reach. The display is supplied via the power from the 4-20 mA output and requires no external power supply and no batteries. There are versions for each BlueInOne; also devices that are already in use can be upgraded.

Advantages:

- Convenient: the current measured values directly on site in view

- Easy installation: quick control without software

- Flexible to install, easy mounting

- Time savings: even if the BlueInOne to reach buttons for one-point calibration bad

- 4-20 mA port included, no ports are blocked