Contact angle Measuring Machine for ball bearings

Dimension range: Bearings Ø 20 – 180 mm. Height 4 – 40 mm.

Machine “TYPE 2″

Dimension range: Bearings Ø 100 - 360 mm. Height 16 – 58 mm.

Performances:

Ball presence check ( except for blind bearings)

Blind bearings : it is possible to take the measurement, by positioning a small tool on the cage

Measurement of the contact angle: direct display in degrees and tenths of a degree (e.g. 16,5 °)

Range of measurement : 0 - 89.9 °

Resolution : 0.1 °

Measurement precision : ± 0.20 °

Cycle time : machine type 1 - 14 Sec; machine type 2 - 17 Sec

Productivity/hour : machine type 1 - 250 bearings; machine type 2 - 210 bearings

Memory : 1500 types of bearing

Data to set (only the first time, from the machine panel or by means of PC): type of bearing, pitch diameter, ball diameter, num.balls , no. run-in revolutions, no. measurement revolutions, spindle load.

For acceptance-refusal of the bearing, for every type of bearing, it is possible to set the min-max value of the contact angle. ( e.g. 25,0° ± 2,5° )

The machine displays the contact angle: A) Fixed, black on white, for the values in the range set B) Flashing, for the values outside the range set , with a signal for the refusal of the bearing

Direct display of the load: machine type 1 daN 1.5 – 47; machine type 2 daN 2.7 – 76

Auto-diagnosis : malfunctioning signals

The machine can be connected to a PC for uploading and downloading data (e.g. measurement reports)

Memory capacity : approx 18.000 measurements

Options: A) The machine can control a sorter up to 12 channels, to be used with an automatic bearing loading/unloading system. The sorter programmes can be set and modified. B) measurement tools: we can construct them or supply the drawings for you to construct them

- See more at: http://www.bussi-demagnetizers.com/en/299/contact-angle-measuring-machine-for-ball-bearings#sthash.AhETyfEQ.dpuf