#Product Trends
TH2838 Series Precision LCR Meter
Component Parameter Test Instrument
Features
■ High accuracy:Adopt Auto-balance bridge technology, 4-terminal pair
■ High stability and consistency:Up to 15 ranges
■ High speed:Up to 5.6ms
■ High resolution:7- inch, 800×600
■ High power:
Signal source:Voltage up to 20Vrms(only TH2838H)
Current up to 100mA(only TH2838H)
DC bias:Voltage up to±40V(only TH2838H)
Current up to 100mA
Up to 120A when controlling 6 sets of TH1778 series DC
Bias Current Source by external DC Bias interface
Independent Voltage Source: ±10V programmable output
(only TH2838H)
■ 201 Points List Sweep Function
■ Multi-parameter Graphic Sweep Function
■ Arithmetical operation
■ 10 bins sorting, sorting result with sound and light alarm
■ Huge storage space:
Internal: 100 groups of setting files, 10 groups of gif image files
External: 100 groups of setting files through USB storage
■ Rich interfaces: USB HOST, USB DEVICE, LAN, HANDER, GPIB
(Optional), SCANER(Optional), external DC BIAS control interface
■ High compatibility: Support SCPI commands, compatible with
KEYSIGHT E4980A, E4980AL, HP4284A etc.
Brief Introduction
■ TH2838/TH2838H/TH2838A is a new generation impedance tester adopting the most advanced auto balance bridge theory in the world
at present. With its 0.05% basic accuracy, speed up to 5.6ms, 20Hz-2MHz frequency range and impedance test range up to 1GΩ, this new
impedance tester can meet all test demands of components and materials, especially for testing capacitor with low D and inductor with high Q.
Four-terminal pair configuration can eliminate the effect of electromagnetic coupling in test cable, to extend the low limit of low impedance
test 10 times than those testers with Five-pair configuration.
TH2838/TH2838H/TH2838A supports 20V AC test signal and 40V DC Bias, new-added improved multi parameter list sweep/graphic
analyze will help customers to extend the comprehensive evaluation ability on components.
TH2838/TH2838H/TH2838A is a strong tool for the design, examination, quality control and production test of electronic components. Its
excellent performances and functions provide a powerful tool for circuit design and development, as well as material (electronic material and
non-electronic material) research and development.
TH2838/TH2838H/TH2838A can realize various tests of commercial standards and military standards, such as IEC and MIL.
Applications
■ Application
1.Passive component
Impedance parameter estimation and performance analysis of capacitor, inductor,
magnetic core, resistor, piezoelectric devices, transformers, chip components
and network components
2.Semiconductor component
Parasitic parameter test and analysis of LED driver integrated circuit C-VDC
features of varactors Parasitic parameter analysis of transistors or integrated
circuit
3.Other components
Impedance assessment of printed circuit boards, relays, switches, cables, batteries
4.Dielectric material
Dielectric constant and loss angle evaluation of plastics,
ceramics and other materials
5.Magnetic materials
Magnetic permeability and loss angle assessment of ferrite,
amorphous body and other magnetic materials
6.Semiconductor materials
Dielectric constant, electric conductivity and C-V characteristics
of semiconductor materials Liquid crystal cell of dielectric
constant, elastic constant and C-V characteristics of liquid
crystal cell