YTG101 gas-lubricated pump mechanical seal

Tandem dry gas seal for centrifugal pump

Parameters：

1. Pressure: 0~10MPa

2. Temperature: -104~320℃

3. Speed: 50~3000 r/min

4. Shaft Size: 18~200mm

5. Medium: Free particles, various hard crystallized chemical fluids.

Material：

1. Metal material: 316L/hastelloy C

2. Seal rings: SIC/carbon

3. O-rings: FKM or Karez

Design features:

1. The primary seal is the contact mechanical seal, the secondary seal is dry gas seal.

2. Dry gas seal is non-contact operation, assure the primary seal has some back pressure to Prolong the life of the primary seal.

3. Little gasification process medium leaked by the primary seal trace into the torch with seal gas, achieve process medium zero leakage..

4. After the failure of the primary seal, dry gas seal work as the main seal to prevent process medium leakage in large number.

Application:

Centrifugal Pump

Cantilever Pump, High Speed Pump,

Submerged Pump, Vacuum Pump

Long-term Cooperation With The Following Engine Company

SULZER PUMP AND COMPRESSOR CO.

JIALITE RENYUAN PUMP CO., LTD.

DALIAN SHENLAN PUMP CO., LTD.

SHENGYANG GERUIDE CO., LTD.

HANGZHOU DALU CO., LTD.

DALIAN HUANENG CO., LTD.

BEIJING AEROSPACE TECHNIQUE CO.

SHENGYANG WATER PUMP CO., LTD.

SHENGYANG GUOTERLONG PUMP CO.