video corpo
Add to favorites

#Product Trends

CONEC ISOBUS – the databus connector for agricultural and construction machines

With increasing demands on the efficiency in agriculture, precision farming is becoming more and more important.

Precision farming indicates for the targeted management of utilized agricultural land, e.g. the individual application of fertilizers and plant protection products depending on the position of the utilized land.

To ensure the necessary communication between tractor, equipment and agricultural management software, the non-proprietary ISOBUS is used. ISOBUS is specified in standard ISO 11783-2 and describes the BUS including the connectors used with it.

To extend the CONEC product range in the field of connection solutions for agricultural and construction machinery, the connectors for ISOBUS are included in the ready-made and overmoulded design.

The overmoulded ISOBUS-series is available as male and female version. The contact carrier has the 9-pin contact layout specified by the standard. Connection/locking of the two connectors is done via bayonet locking. Due to the overmould, continuous IP67 protection of the housing up to the hybrid cable is ensured.

Currently, two different cable variants are available which are specifically designed for agricultural applications. The cable variants differ in the cross-section of the stranded wires for ground and power with 6 mm² and 10 mm².

The CONEC ISOBUS connector assembly is plugged in on the tractor in the so-called IBBC [ISOBUS Breakaway Connector]. In the IBBC, the bayonet coupling is overridden and the connector is locked in place with a spring bracket.

In unmated condition, the IBBC is protected against moisture and dirt by a protective cap with integrated seal. To protect the seal of the protective cap in mated condition, the ISOBUS connector is equipped with a landing plate. The standard version is round, optionally there is also a landing plate with flattened outer surface. Upon request, the connectors can be supplied completely without landing plate.

At the connection side, the female connector comes with a quick release bayonet locking. CONEC has developed a dust protection cap for the female version and uses it to protect the contact area against dirt and moisture. By default, the dust protection cap is connected to the connector by means of a captive stainless steel lanyard.

The ISOBUS connector series is designed both as open end cable and as connecting cable.

The ISOBUS connector series is designed both as open end cable and as connecting cable.

CONEC provides a version with corrugated tube for better protection of the hybrid cable. In this version, the hybrid cable is protected by a corrugated tube which is integrated in the overmould geometry.

Productdetails:

Benefits:

• Robust and ergonomic design

• Version with or without landing plate

• Two cable types

• Version with additional corrugated tube

• Standard with captive dust cap (female connector)

• Due to the overmould, continuous IP67 protection of the housing

up to the hybrid cable is ensured

• Use in harsh environments

Fields of application:

• Agricultural machines

• Construction machines

• Technical emergency vehicles

• Process control

CONEC ISOBUS – the databus connector for agricultural and construction machines

Details

  • Ostenfeldmark 16, 59557 Lippstadt, Germany
  • CONEC Elektronische Bauelemente GmbH

    Keywords