Special adhesive for automotive lighting

DELO offers special adhesive for automotive lighting applications

DELO offers special adhesive for automotive lighting applications. DELO PHOTOBOND OB4189 is resistant to yellowing and, with its high aspect ratio, is particularly suitable for bonding microlens arrays, such as those found in headlights and projection systems.

With a high viscosity of 75,000 mPa·s, DELO PHOTOBOND OB4189 enables a high enough aspect ratio for the bonding process. The adhesive thus retains its shape after dispensing and does not flow, which is important for bonding microlens arrays. It is also extremely resistant to yellowing, as shown by life cycle simulations of 500 hours at 140 °C. This is essential for such optically demanding applications.

More information

Details

DELO-Allee 1, 86949 Windach, Germany

DELO Industrie Klebstoffe

Associated Trend items

DELO presents a jet valve for ultra-small dispensing quantities

DELO has introduced another microdispensing valve. The DELO-DOT PN5 LV pneumatic jet valve is designed for dispensing low-viscosity adhesives and other media in miniaturized applications. Thanks to its compact design, it also requires very little spa

This device widens DELO's existing portfolio of dispensing valves. While the closely related DELO-DOT PN5, introduced in 2022, was developed for more viscous, highly filled materials, the new LV (low-viscosity) variant is primarily aimed at dispensing smaller droplet sizes of low-to-medium-viscosity media with up to 35,000 mPa·s. Interchangeable nozzles with different d...

More information

DELO organizes Virtual Semicon Conference

The Semicon Meets Sustainability virtual conference, organized by DELO, will take place on November 5, 2024 from 8:00 to 10:15 a.m. (CET) and in a condensed format from 5:00 to 6:40 p.m. (CET). Experts from the adhesive manufacturer as well as renowned industry experts will discuss new developments in sustainable back-end packaging. In addition, smart materials and technologies for photonics integration that can help reduce energy consumption in the future when processing AI-generated data will

Microchips are a key technology in our connected world. They drive the future while simultaneously increasing energy requirements. This is because not only semiconductor production, but also processing data obtained through new technologies such as AI, is energy-intensive. The Semicon Meets Sustainability virtual conference touches precisely on this topic. The conferenc...

More information

DELO offers another adhesive for closed-cavity packaging

DELO has developed a reliable sealant adhesive for CMOS image sensors, which are often used in driver monitoring systems. Glass filters can be bonded directly to the semiconductor chip using DELO DUALBOND EG6290. The electronics-specified adhesive can be dispensed in narrow, high bondlines, can compensate for temperature-dependent pressure changes, and meets routine automotive standards.

Electronic adhesive with improved properties The adhesive was specially designed for the glass-on-die assembly method. The glass filter is fixed directly onto the chip, as is typical with iBGA image sensor packaging. Compared to other products, DELO DUALBOND EG6290 has a significantly higher Young's modulus of 2,350 MPa and significantly higher adhesion value. Due to a...

More information

Products associated

acrylate adhesive

DELO PHOTOBOND

Compare

Remove all

Compare up to 10 products