fiber laser cutting machine

How to Perform Correct Maintenance on Laser Cutting Machine Repair?

1. Fill the Linear Guide with Lubricating Oil

Metal laser cutting machines, fiber laser cutting machines and metal laser cutting machines have been used for a period of time. The smoke and dust generated by engraving and cutting will corrode the guide rails, so the guide rails must be maintained regularly.

Turn off the power of the metal laser cutting machine, use a clean soft cloth to clean the guide rail, and then drip lubricating oil on the guide rail. After applying the oil, let the slider roll back and forth on the guide rail to ensure that the lubricant enters the inside of the slider. After applying oil, let the slider roll back and forth on the guide rail. At this time, you must install the guide rail first. Be careful not to fix it first when installing the guide rail. Install all the fixing nails and keep them level. Then fix the belt and slider. Install the lens again, adjust the light and the direction of X is completed.

2. Cleaning of Reflector and Focusing Mirror

Metal laser cutting machine, after the laser cutting machine is used for a period of time, the smoke will adhere to the surface of the lens, affecting the engraving and cutting depth, and also affecting the engraving and cutting accuracy. Generally, the three reflecting mirrors and one focusing mirror should be carefully wiped clean with absolute alcohol in about a week.

3. Oil the Bearings

Laser cutting machines use a large number of bearings. In order to ensure good cutting and engraving effects, some bearings need to be refueled regularly. Use a clean soft cloth to wipe off the floating soil on the bearings, use a needle to suck the oil into the needle, and then slowly inject the oil into the bearing with a needle. , just turn the bearing slowly when filling the oil.

4. Timing Belt Tightness Adjustment

There are several synchronous belts in the transmission system of the laser cutting machine. If the synchronous belt is too loose, ghosting of the engraved fonts will occur. If the synchronous belt is too tight, the synchronous belt will be worn. After using it for a period of time, please adjust the tensioning screw of the synchronous belt so that the synchronous belt is appropriately tight so that the engraving text does not appear ghosted and the metal laser cutting machine operates with very low noise, or consult the manufacturer. Technical staff.

5. Maintenance of Laser Tube

The laser tube in the metal laser cutting machine is cooled by circulating water. After long-term use, there will be some white scale in the tube. We can add a small amount of vinegar to the circulating water to remove the water in the tube, and then use clean Water will wash away the internal circulation of the laser tube, so that the laser tube will be in the best working condition and its life will be extended. During the use of metal cutting machines, for safety protection and efficient production, the most important thing is the equipment Routine safety maintenance and upkeep. This can not only extend the service life of the fiber laser cutting machine, but also maintain and improve the processing quality of the output port, ultimately achieving stable and high efficiency.