S series main / emergency-off switch with low-voltage circuit breaker

Elektra S series main switches with a low voltage circuit breaker provide protection against automatic restarting when power is restored following a power cut. They fulfil the requirements of DIN EN 60204 Part 1, clause 7.5 by means of a low-voltage circuit breaker coil, which has a mechanism that after any power cut causes the switch to jump back into the 0 position. If there is no power, the switch cannot be turned on.

Additional equipment

Power bus connection

Extra terminal clamp for control current circuit

Auxiliary contacts' function

More information

Details

ELEKTRA TAILFINGEN Schaltgeräte GmbH & Co. KG

Keywords

Disconnect switches

Associated Trend items

Emergency Off and Repair Switches

Main, emergency off and repair switches

A manually operated main switch must be provided for each mains feed in order to disconnect the machine's electrical equipment from the mains (e.g. when work on the electrical equipment is to be done). Designed as a circuit breaker as per EN 60947-3 for category of use AC-23B Manually operable with just one On and one Off position, which are clearly marked 0 and I V...

More information

construction site current distributors

What types of site power distributors are there?

The type and scope of electrical equipment on construction sites is geared to the size and particular circumstances of each site. Using the types of distributor described in the equipment standards, it is possible to set up a power supply solution from the feed-in point from the public grid all the way to the consumer connection tailored to all site requirements. Constru...

More information

Compare

Remove all

Compare up to 10 products