NEW: round cap by EMKA

With the cap installed, protection class IP65 is achieved. Material selection meets the high requirements with regard to UV resistance and aging. The holding force was proofed by a wind tunnel testing at 450 km/h over 15 min each from 4 directions. A vibration and shock-test according to DIN EN 61373, category 1, class B (enhanced test conditions) completes the ambitious test procedure

The cap fulfils the highest requirements regarding the protection of the interior locking system. In conjunction with the compression latch with visual open status indication the cap will not lock while the compression latch is open and by this means the unsecured lock is visible at any time.

More information

Details

EMKA

Keywords

Hinges

Associated Trend items

EMKA solution for the HVAC sector

New locking hinge solution for the HVAC sector by EMKA

The new locking hinge by EMKA meets all the criteria for securing big air-conditioning units. By using a height-adjustable hinge bracket, it also makes a precisely adjustable gasket compression possible. EMKA has based the development of the new locking hinge for the HVAC sector not only on the national and international standards but especially on the RLT guideline ...

More information

Quick fastener Program 1022

Product description

Assembly and disassembly without tools Product consists of insert unit plus locking lug self-sealing design Acoustical and visual check while latching of the snap-in pin Suitable for versions LH/RH Suitable for door gauges 1.5 mm up to 2.0 mm Standard cut-out 1022 programme Completely made of PA6 GF30 Different cam heights available (Heights = 7.5/13.5/19.5 mm) ...

More information

New: Program 1000 - Stainless Steel Compression Latches for Hygienic Areas

In addition to the well-established quarter turn for hygienic areas 1000-U838, EMKA has now included the compression latches for hygienic areas 1000-U861 and 1000-U862 in its range of products. As in the case of 1000-U838, the components of the 1000-U862 that are outside the appliance meet the hygiene requirements and the relevant specifications of the BGN (German "Berufsgenossenschaft Nahrungsmittel und Gastgewerbe" - statutory accident insurance institution for foods, hotels, restaurants and catering) Furthermore, the compression latch for hygienic areas 1000-U861 complies with these also inside the appliance.

Product benefits The stainless steel compression latches for hygienic areas comply with the relevant standards for hygienic areas DIN EN ISO 14159, DIN EN 1672-2, DIN 10516 and meet specifically the following requirements: easy to clean surfaces maximum possible radiuses, avoiding cracks and nooks, undercuts and open hollow spaces optimum fit of the gasketing (o...

More information

Products associated

round cap

1C-340

Compare

Remove all

Compare up to 10 products