Yangzi AI Inverter Cold Storage Reduces Long-Term Operation Costs

400 to 200 kWh and 2.5-Minute Defrost: The Verified Energy Math Behind Yangzi's 50% Cost Cut

Yangzi AI inverter cold storage cuts long-term operating costs with 50% comprehensive savings verified by CQC certification under GB 44015-2024. The savings come from eliminating two major energy wasters: fixed-speed start-stop surge is replaced by compressors cruising at medium-low frequency, and hot-gas defrost lifts energy utilization from 30% to 70%, shortens defrost from one hour to 2.5 minutes and holds fluctuation within ±1℃. Real cases confirm it: a Laiwu garlic base halved consumption from 400 to 200 degrees per cycle, while Lehuigou Supermarket runs six 2-16HP units across its 5,000-square-meter store. The Pro II series adds up to 50% higher cooling capacity above 40℃ ambient. EXTRCOOL provides variable-frequency cold storage solutions.

More information

Details

Area 51, NV, USA

EXTRCOOL INDUSTRY LIMITED

Associated Trend items

The CDU, the Heart and Brain Liquid Cooling Cannot Do Without

Silent When Healthy, Fatal When Failing: The Five Selection Questions That Decide Whether the CDU Holds the Loop Together

The CDU plays the role the heart plays: it produces no cold, but without it the coolant never moves. Its heart role pumps and distributes via the manifold, while its brain role senses and controls. Selection answers five questions: total flow above all cold plate minimums, head above maximum loop resistance, exchanger capacity above peak load with fouling margin, redunda...

More information

The Manifold That Decides Where the Coolant Goes

From CDU to Cold Plate and Back: How the Manifold's Flow Distribution, Not Total Flow, Decides Precision Cooling

Rising AI GPU power is moving liquid cooling from whether it can cool to cooling precisely, and the manifold decides whether coolant reaches every position as it should. It distributes coolant through main channels to parallel branches and collects the heated return, following CDU to supply manifold to cold plate to return manifold to CDU. Poor design lets near-end branc...

More information

How a Liquid Cooling Manifold Gets Made, from Material to Final Acceptance

316L to Helium Testing: The Four Links—Material, Machining, Cleanliness and Verification—That Decide Manifold Quality

Manifold manufacturing starts with material, and 316L is the safer default, with coolant compatibility outweighing thermal conductivity. CNC machining forms main channels, branches and interface holes, where holding channel positions matters more than drilling; one-piece machining avoids weld deformation, while tube and plate assemblies add laser, TIG or brazing. Deburri...

More information

Products associated

refrigeration unit for food applications

EXT series

Compare

Remove all

Compare up to 10 products