EXTRCOOL, the Match Between Load and Cooling That Decides the Route

Cold Plate, Immersion or Spray: Why Compute Density, Budget and O&M Capability, Not Sophistication, Pick the Route

Single-chip power in the hundreds of watts has pushed air cooling past its noise and energy ceiling, and the industry splits mainstream liquid cooling into three routes by how coolant touches the heat source: cold plate with indirect contact, immersion and spray with direct contact. Cold plate attaches a plate to the CPU and GPU surface without core hardware redesign and fully meets 20 to 40kW per rack. Immersion holds PUE within 1.05 for supercomputing, and spray jets coolant onto chips as a local supplement needing validation. EXTRCOOL provides one-stop liquid cooling solutions.

More information

Details

Area 51, NV, USA

EXTRCOOL INDUSTRY LIMITED

Associated Trend items

Surface Treatment for Liquid Cooling Manifolds, the Natural-Finish Pickling Process

Matte White to Natural Luster, Blue-Point From 12-18 to Above 20 Seconds: The Two-Stage Route That Removes Weld Scale Without Touching the Base

Surface treatment for liquid cooling manifolds starts from the weld problem: the heat-affected zone triggers intergranular chromium depletion that degrades surface oxidation and roughness, threatening long-term corrosion resistance, and conventional pickling removes the scale but turns the weld grey, rough and the stainless matte white. The natural-finish route runs two ...

More information

The Stainless Manifold, the Hidden Gatekeeper of AI Server Liquid Cooling

One Uneven Split, One Throttling GPU: Why the 120-140kW NVL72 Turned the Manifold Into NVIDIA's Certified Gatekeeper

The stainless manifold is the hidden gatekeeper of AI server liquid cooling: the cold plate sits on the GPU, the CDU handles exchange, the manifold splits one flow into dozens and the quick coupling allows maintenance without breaking the loop, so in an NVL72 cabinet an uneven split lets one GPU drift hot, throttle first or trip protection. Stainless wins on ten-plus-yea...

More information

Manifold and Quick Coupling Selection, the Field Guide for Cold Plate Cooling

0.86 × Heat ÷ ΔT With 20% Margin, Server Thread First, 20 Bar and 5,000 Cycles: The Five-Step Selection That Stops Leaks, Not Just Flow

Manifold and quick coupling selection for cold plate cooling starts with the failure mode: the manifold divides one flow into many branches but its risk lives in the interfaces, so seal reliability outranks flow testing. Sizing follows 0.86 times the heat over the temperature difference with 20 percent margin, a 40 by 40 tube holding 75 liters per minute for 25 to 50 kil...

More information

Products associated

modular micro datacenter

EXTRCOOL 20FT

modular data center

LL-Block40

Compare

Remove all

Compare up to 10 products