EXTRCOOL Liquid Cooling Micro-Module, From Agile Deployment to Extreme Efficiency

Over 70% Faster Deployment, PUE 1.15-1.25 and 150kW Racks: The Four Claims That Make Micro-Module Plus Liquid Cooling Standard

EXTRCOOL fuses the micro-module's agile architecture with liquid cooling to deliver a packaged solution with four claims: urgent-launch speed, gradual investment, over 50% electricity saving and lower O&M labor. Power, liquid cooling and monitoring systems are prefabricated, integrated and full-load tested in the factory, leaving only modular quick connection on site, shortening deployment by over 70%. Cold plate routes coolant straight to the heat source at PUE 1.15 to 1.25 and 30 to over 150kW per rack. EXTRCOOL provides one-stop liquid cooling solutions.

More information

Details

Area 51, NV, USA

EXTRCOOL INDUSTRY LIMITED

Associated Trend items

Surface Treatment for Liquid Cooling Manifolds, the Natural-Finish Pickling Process

Matte White to Natural Luster, Blue-Point From 12-18 to Above 20 Seconds: The Two-Stage Route That Removes Weld Scale Without Touching the Base

Surface treatment for liquid cooling manifolds starts from the weld problem: the heat-affected zone triggers intergranular chromium depletion that degrades surface oxidation and roughness, threatening long-term corrosion resistance, and conventional pickling removes the scale but turns the weld grey, rough and the stainless matte white. The natural-finish route runs two ...

More information

The Stainless Manifold, the Hidden Gatekeeper of AI Server Liquid Cooling

One Uneven Split, One Throttling GPU: Why the 120-140kW NVL72 Turned the Manifold Into NVIDIA's Certified Gatekeeper

The stainless manifold is the hidden gatekeeper of AI server liquid cooling: the cold plate sits on the GPU, the CDU handles exchange, the manifold splits one flow into dozens and the quick coupling allows maintenance without breaking the loop, so in an NVL72 cabinet an uneven split lets one GPU drift hot, throttle first or trip protection. Stainless wins on ten-plus-yea...

More information

Manifold and Quick Coupling Selection, the Field Guide for Cold Plate Cooling

0.86 × Heat ÷ ΔT With 20% Margin, Server Thread First, 20 Bar and 5,000 Cycles: The Five-Step Selection That Stops Leaks, Not Just Flow

Manifold and quick coupling selection for cold plate cooling starts with the failure mode: the manifold divides one flow into many branches but its risk lives in the interfaces, so seal reliability outranks flow testing. Sizing follows 0.86 times the heat over the temperature difference with 20 percent margin, a 40 by 40 tube holding 75 liters per minute for 25 to 50 kil...

More information

Products associated

modular micro datacenter

EXTRCOOL 20FT

modular data center

LL-Block40

Compare

Remove all

Compare up to 10 products