New automatic CA tightening system

Productivity and ergonomics within your reach

Increasing the productivity of your tightening processes while ensuring ergonomics for your operators is even easier today with Fiam's new CA handheld tightening systems with automatic screw feeding.

You indeed have significant advantages:

- You eliminate the manual phases of picking and positioning the screw

- With a simple click on the screwdriver you activate the automatic "shot" of the screw to the tightening point

- You assure operational continuity and no jams

- You reduce fatigue to the hand-arm system thanks to the automatic forward bit stroke device (patented)

- Tightening times are reduced by up to 35% for a significant increase in productivity

- Being an Industry 4.0 Solution, provides interconnectivity with the factory system.

INTERCONNECTIVITY WITHIN YOUR REACH

CA is a tightening system that interacts with the Factory System, this means:

- you can remotely manage it in real time

- it interfaces with PLCs and the various devices on the production line such as the conveyor belt, jig activation/deactivation systems, signaling/monitoring devices such as LEDs, part counters, light towers.

With data storage it is possible to provide statistics to monitor the machine operating cycle and therefore productivity.

TORQUE/ANGLE CONTROL SYSTEMS FOR ANY REQUIREMENT

You can have different levels of torque or torque/angle control systems such as:

- Screwdrivers with torque control by mechanical clutch and automatic shut off

- Screwdrivers with torque/angle by current control

- Screwdrivers with torque/angle control by built-in transducer and resolver

SCREW FEEDERS FOR EVERY PRODUCTION NEED

To feed your screws automatically you can choose from several models tested and ready to use that we will customize to your application.

They are all equipped with numerous features that will make your production process fast, safe, reliable:

- Integrated PLC that manages all feeder parameters

- Web Server interface to connect remotely to the machine

- Sensors, photocells and devices for good functionality and operational continuity

- Modbus TCP/IP protocol to relate with the factory system and keep the work cycle under control.

FAST PAYBACK

The time saved per screw (4.8 sec/piece = -32%) translates into a substantial money saving that allows you to return your investment in a very short time.

Find out all the features and innovations in the catologue. Contact us, can tell you which system is best suited for your process: info@fiamgroup.com