JUPITER XL

Automatic bandsaw machine for 305mm cutting

Automatic sawing machine with 27mm high blade with cutting capacity of mx 305mm in diameter and 300mm x 310mm in rectangle, it is possible to make cuts from 0° to 60° to the right.

Arch structure made of 3 parts: special aluminum alloy, steel and cast iron. Digital panel for controlling machine functions, programming cutting cycles and self-diagnostic function.

VHZ electronic speed variator for a wide choice of blade speeds, from 16 to 120 m/min.

Bow movement system with hydraulic cylinder and balanced descent adjustment valve in front position to optimize cutting.

Blade guide with combined action of lateral bearings, widia plates and pressure bearing.

Gear reducer with cemented inclined teeth, ground and lubricated with long-lasting grease.

Blade cleaning brush dragged by the engine flywheel. Roller conveyor 750 mm long for supporting the material on the loading side connected to the base.

Carriage vice for advancing material equipped with hydraulic cylinder and self-centering device for non-straight bars.

Sliding on chromed columns, useful advance stroke of 510 mm (For the C 1000 version the useful stroke is 1005 mm).

Micro lack of material positioned on the carriage vice.

Final cutting waste approximately 300 mm.