IEG-TCMM-1/2

CUSTOMIZED LEVEL FOR EVERY CUSTOMER

The strength of F.lli Giacomello s.n.c. has always been the ability to establish a unique and privileged relationship with the customer. This peculiarity leads the company to personalize and develop together with its interlocutor the level suitable for every need and condition of use, as it happens for IEG-TCMM-1/2: levels made with single or multiple control points, and different materials to meet every application need.

The IEG-TCMM-1/2 levels are built to guarantee the maximum level of minimum and / or maximum levels of liquids in tanks, hydraulic power units containing mineral oils with viscosity not higher than 80 ° E; These levels are also suitable for diesel oil and other non-corrosive and flammable liquids. The strength of these levels is certainly the compact size, suitable for medium / small tanks, or where the available space is reduced.

When the indicator float in its travel meets the built-in Reed switch at the pre-set point, the contact, solicited by the magnet housed in the float, opens or closes, thus having the possibility of sending a luminous, acoustic call signal at a distance. or activate or interrupt any electrical equipment connected to it.

The indicator must be mounted in a vertical position, on a 1/2 "GAS threaded hole; the seal is guaranteed by a flat synthetic fiber gasket.

The float must be at least 35 mm from the ferrous surfaces (tank walls, etc.).

IEG-TCMM-1/2: precision, functionality and a unique level for each customer.