#Product Trends
Small, Smaller, Smallest....hotrod® HHP Ø 1/8“ (3.1 mm) High Power Cartridge Heater
Key Technical Features
Sheath material Stainless steel 1.4541
Heating conductor material NiCr 8020
Max. sheath temperature 750 °C / 1380 °F
Wattage tolerance* ± 10 %
High voltage test* 800 V AC at > 24 V operation voltage, 500 V at £ 24 V operation voltage
Insulation resistance* ³ 5 MW at 500 V DC
Leakage current* £ 0.5 mA at 253 V AC
Max. sheath surface load 30 W/cm2 / 190 W/inch2
* tested at environmental temperature
Diameter tolerance ± 0.05 mm / 1.97 mils
Min. Length 25.4 mm / 1 inch
Max. Length 150 mm / 5.91 inch
Length tolerance £ 76.2 mm: ± 2.4 mm / 0.09 inch
> 76.2 mm: ± 3 %
UBa Length 8 mm / 0.31 inch
UBb Length 6 mm / 0.24 inch
Max. voltage 250 V
Max. current 2.0 A
Connection option** Mounted internally high temperature resistant glass silk insulated Ni-leads, wire cross-section 0.095 mm2, max. Temp. 600 °C / 1112 °F
** additional connection options available upon request
Application fields
L Packaging machines
L Gas analyzers
L Mass spectrometry
L Ink jet printers
L Solid-state relays (SSR)
*** Dimensions on request ***