Automatic Elemental Analyzer/ Infrared Sulfur Analyzer SDS350 by Sundy

Meet Us at

Analytica 2016

10th - 13th May

Munich, Germany

Booth Info: Hall B2, No.142

The SDS350 Automatic Elemental Analyzer / Infrared Sulfur Analyzer is an automatic, fast and accurate sulfur analyzer which can be used to determine the total sulfur content in coal, coke, ash, biomass and other combustibles with infrared absorption method. This analyzer is full automatic with 50 auto loader, it can realize the sample loading, sample introducing, combustion, analysis and result report automatically without any attention, continuous test is available. Each test time is about 2 minutes.

Standard Conformity

ISO 19579, ASTM D4239

Specification

Method: Infrared absorption

Test Range：0.01%-50% (Possible to Extend up to 100%)

Sample Weight：100~500mg for coal

Recommended Weight:（300±50）mg

Analysis Time：≤ 2 min per sample

Autoloader: 50 Samples

Furnace Working Temperature：1250~1350℃

Temperature control accuracy : min ± 5° C

Pressure of Oxygen Source: ≥1MPa

Gas Requirement: Oxygen (99.5% purity)

Power Requirement:220 V（-15%-10%），50Hz

Max Power: 4kW

Features

1. Specially designed high temperature combustion tube with secondary combustion function, makes sure the samples are combusted thoroughly.

2. High automation

The analyzer will introduce, test, and discard the samples automatically without attendance, high temperature radiation damage to the eyes is avoided.

3. With self-developed ultra-low drift infrared cell guarantees, accurate test is obtained.

4. Up to 50 samples can be loaded once.

5. Analysis Time per sample is less than 110s, total analysis time per sample < 3 minutes.

6. Easy-to-use Windows-based software, it only needs to click the mouse after weighing and placing the samples.

7. Easy data handling, real time data can be transmitted by internal network.

8. With CAN bus interface for controlling.