Driver Torque Meter I-8/I-80 has been renewed !

Compact and easy-use torque meter I-8/I-80 from IMADA, Japanese force and torque instrument manufacture, has been renewed.

It provides wider measuring range and faster speed of RS232C serial communication than before. The torque meter helps your torque driver check easily and efficiently.

Each capacity is I-8: 0.020~8.000 kgf-cm (0.20~78.60 cN-m or 0.020~6.970 lbf-in) , and I-80: 0.20~80.00 kgf-cm (0.020~7.860 N-m or 0.20~69.70 lbf-in). CW/CCW both rotations are available.

The usage is easy. Put the included joint, turn the power on and measure torque of tools such as torque drivers. The compact size and light-weight torque meter can be carried out the torque check anywhere.

Pass/Fail decision which realizes efficient torque check is also available. The green and red lights notice the torque is in the specified range or not.

Specifications

□ Capacity: I-8: 0.020~8.000 kgf-cm (0.20~78.60 cN-m or 0.020~6.970 lbf-in) ,

:I-80: 0.20~80.00 kgf-cm (0.020~7.860 N-m or 0.20~69.70 lbf-in)

□ Unit (switchable) I-8: cN-m, kgf-cm, lbf-in

I-80: N-m, cN-m, kgf-cm, lbf-in

□ Resolution: 4 digit

□ Accuracy : +/- 0.5%F.S. or 3 digit at less than 499 digit

□Measuring direction: CW/CCW

□Measuring mode: P-P(Peak-hold), T-R(Track), P-D(Peak-down),C(real time data output)

□Max./ Min./Ave. display: Display stored Max. / Min. /Ave. / Number of measuring values.

□ Real time data output: Output applied torque approx. 1/180 sec each.

□ Internal memory: 800 data (Auto saving is available)

□ Output data: ASCII (baud rate 19200 bps)

□ Socket joint part (Detecting parts shape): Square 20 mm / Square 9.5 mm

□Included items (1 each): Attaché case, battery charger, inspection certificate (*2), calibration certification (*2), traceability system diagram(*2) Driver adapter OW-025/OW-10 (for I-8) or Driver adapter OW-20/OW-60 (for I-80)

Please visit our website or contact us if you need more information.