The new receiver S DC: designed big and built without skimping, for “mobile" sectors

The new receiver S has also its S DC version

The new receiver S has also its S DC version.

Designed to be powered in 11÷30 Vdc nominal, it offers the unusual capacity to work even in presence of strong battery voltage drops, which affect mobile machines during the cold season.

This receiver takes advantage of the AFA (Adaptive Frequency Agility) technology for the automatic management of the communication channels, while the traditional fixed-channel mode is still available.

The size and weight are the minimum of the category (127 x 147x 70 mm, 630g) and allow its installation in small spaces.

It has a wide availability of outputs: CAN/Canopen, up to 14 MOSFET outputs and up to 4 analog outputs.

It can use wiring interfaces such as cable glands, multi-pin connectors (Harting) and Deutsch.

Between the most typical options, there is the serial cable connection and the external antenna.

Like the S AC version, the STOP and the motion-commands functional security reach the maximum level, PL e (EN ISO 13849-1:2000 6.2.7) and PL d (joystick), respectively.

The receiver S DC has the IP 66 degree of protection, which certifies its suitability to work even in the most demanding working conditions.