JAKŠA cryogenic solenoid valves with extended coil stem

As a complex assembly of different materials (Copper, steel, thermoplastic or duroplastic) the coil is sensitive to temperature fluctuations and moisture. Extreme operating conditions in cryogenic applications can therefore significantly shorten coil life.

Coil stem extension is one of the simplest and most effective ways of coil protection in cryogenic applications — the coil is distanced from the valve body and pipeline.

Coil stem extension is used in all JAKŠA cryogenic valves — now ranging in size from 1/2" to 2". This way the coils are much less susceptible to frost and condensate build up and will reliably operate much longer.

JAKŠA cryogenic solenoid valves are pilot-operated, with PTFE piston seals.

Valve design enables large flow rates with all cryogenic fluids at temperatures down to -196 °C and pressures up to 10, 15 or 20 bar, depending on valve size.

More information

Details

JAKSA SOLENOID VALVES

Keywords

Valves

Associated Trend items

JAKSA solenoid valves for pressures up to 500 bar with sealing pin

Due to its shape, the sealing element is also more resistant to wear and tear, thereby enabling the valves to perform large numbers of operating cycles maintenance-free. The valves are available in NC (closed when no voltage is applied) and NO (open when no voltage is applied) variants, with coils for any standard voltages in the 24 to 230 V range. They are made of st...

More information

Solenoid valves for pressures up to 100 bar

We have expanded the range of JAKŠA high pressure service solenoid valves with two new types: XBS1 and BS1N

Both are compact valves with pilot operated piston and TM35 type coil. Valve seat diameter is 6 or 7 mm and ports are G1/4 or G3/8. Valves are available in brass or stainless steel body, with PEEK main seal (piston) and O-rings in NBR, EPDM or FPM. Minimum pressure differential of 0.5 bar is required and maximum operating pressure is 100 bar. Valve design and choice of m...

More information

Explosionproof valves JAKŠA now rated to -40°C

The use of advanced materials guarantees safe and reliable operation in harsh outdoor conditions. Solenoids have explosion protection marking II 2 G Ex e mb IIC T4/T5 Gb and are certified both according to ATEX and IECEx. They can be used with the whole range of JAKŠA solenoid valves. Visit our website for technical data and ordering.

More information

Compare

Remove all

Compare up to 10 products