Tensile and Compression and Flexural Properties of Rigid Cellular Plastics

Rigid Cellular Plastics Testing Machine

→Used for determining the flexural strength and the apparent flexural modulus of elasticity of rigid cellular plastics.

→Used for assessing the behaviour of a bar of rigid cellular plastic under the action of three-point bending, to determine either the load for a specified deformation or the load at break.

→Used for determine the compressive strength and corresponding relative deformation or the compressive stress at 10% relative deformation and when desired, the compressive modulus of rigid cellular plastics.

→Used for determine the tensile strength of

→Place a test specimen symmetrically upon the support edges and apply an increasing force perpendicular to the longitudinal axis of the specimen by moving the loading edge at a constant speed of:

(20±1)mm/min for the determination of the apparent flexural modulus

either (20±1)mm/min or (100±10)mm/min for the determination of other flexural properties.

→Comply with ISO1209-1 Determination of flexural properties-Part 1: Basic bending test (GB/T8812.1)

→Comply with ISO1209-2 Rigid cellular plastics-Determination of flexural properties-Part 2: Determination of flexural strength and apparent flexural modulus of elasticity (GB/T8812.2)

→Comply with ISO844 Rigid cellular plastics-Determination of compression properties (GB/T)

→Comply with ISO1926 Rigid cellular plastics-Determination of tensile properties (GB/T9641)