Add to favorites

#Industry News

What conditions are required for the use of pipe corridor communication systems?

What conditions are required for the use of pipe corridor communication systems?

Pipe corridor communication system is a kind of communication method with excellent performance. This kind of equipment is widely used. Today we will introduce to you the conditions for using the pipe corridor communication system. Now let Babaitong Smart introduce you.

1. According to the characteristics of long transmission distance of the pipe rack, the optical fiber transmission method should be adopted.

2. As a communication support system, he is also an emergency telephone system.

3. It should also have a recording function, so as to provide a basis for investigation and evidence collection in the event of an emergency in the pipeline corridor.

4. The system should be able to connect with external public networks. It not only makes the telephone in the pipe corridor go out, but also allows the telephone users of the external public network to enter the pipe corridor. In addition, it should also ensure that any phone in the pipeline corridor will not affect the use of other phones, and truly achieve smooth communication.

5. The system adopts cascading mode. Any connected device in the middle provides a transmission signal to the next connected device. In this way, once an intermediate device fails, the network will not collapse or paralyze due to a failure. The use of cascading mode technology can continue to use the entire network and bypass the point of failure to ensure the normal use of the network.

6. According to the characteristics of constant temperature and humidity of the pipe corridor, all electrical products entering the pipe corridor must have a protection level not lower than IP65. This is determined by the characteristics of constant temperature and humidity in the pipe corridor. There are many microorganisms in the pipeline. The corrosion of these electronic components by these microorganisms will be very serious. Therefore, all electrical equipment entering the corridor must have a good degree of protection.

7. The system should have self-checking function. The system should ensure that all phones in the system are in good condition. In this way, the fixed telephone communication system should have the function of monitoring its terminals and intermediate connection equipment. When any component of the system, including but not limited to switches, fiber optic transceivers, optical transceivers, telephones, etc. When a fault occurs, you should immediately receive feedback and report to the operation and maintenance personnel for maintenance.

The above is the introduction of the conditions of the use of the pipe corridor communication system by Shenzhen Babaitong Intelligent Technology Co., Ltd., then this article is over here! Thank you for reading!

Tag: pipe corridor communication system

Details

  • Yuyao, Ningbo, Zhejiang, China
  • Eric

    Keywords