Shijiazhuang Sunbo Pump Co., Ltd company News and Trends items

The SF Froth Pump is of heavy duty construction, designed for continuous pumping of highly abrasive and corrosive frothy slurries. It has a vertical shaft configuration and comprise a hopper, with vertical Bearing Assembly, and Type 'HS' pump wet-end. It features a wide choice of replaceable abrasion resistant metal or moulded rubber casing liners and impellers.

SSA series centrifugal sand pump is designed for continuous operation of heavy slurries that are abrasive, corrosive, or just plain tough to pump. SSA Series Pump are more compact in design, and it can be adaptted for hydraulic motor drive. It is mainly used for oilfield frac trucks as well as blending and pump dealing for water well drilling solid control system applica...

The SXP type frac pump is single-stage, single suction centrifugal slurry sand pump, which is used on frac truck mostly. It is good at handling big capacity of high abrasive, corrosive and plain tough slurries. The pump wet parts are made of high chrome alloy, hardness HRC58-62. The impeller is open type and back vane design decrease the slurry pressure to stnffing...

SBF Slurry pump is horizontal froth slurry pump is pumping slurry with obstinate froth. of a special design-inducer blade impeller to solve this problem easily. Design features: Take a small bulk ,high efficiency. Special froth impeller with large inlet size, this benefit to the large size solids come There is difference between pumping froth slurry and normal slurry....

We can offer Slurry Pump,Mining Pump, Feed pump. Vertical Pump,Pit Pump, Sump pump, Dredge Pump, Sand Pump, Drilling Pump, Mud pump, chemical Pump,Foam pump...and Pump parts.

The Pump specially works on design, develops, OEM and manufactures of oil blender frac pumps. We have types of 14x12 blender pumps, DF design type, and fracking pumps and fluid ends spare parts interchangeable with NOV Mission Magnum XP Pump 14x12 and MCM XL 12x14 pump types.

FEATURES: Bearing assembly -- A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. Liners -- Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are comple...

The HS series pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing bolts reduce maintenanc...

Specification: Capacity (m³/h): 360-1440 Head (m): 10-60 Speed (r/min): 400-850 Max. Efficiency η%: 65 NPSH (m): 1.5-4.5 Allowable Max. Power (Kw): 600 Description: The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling ...

The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component lif...

The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component lif...

The pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipments work efficiently. Features: 1. Open impeller design, ideally dealing high viscosity drilling slurries. 2. Combination seal for a l...

The Hydraulic Fracturing Pump 14x12x22 / 12x10x23 is equivalent to Mission Magnum XP 14x12x22 / 12x10x23. Single stage, single suction, horizontal centrifugal pump. The pump covers applications of big capacity of abrasive, corrosive and plain tough slurries with high sand concentration, especially oil and gas stimulation on frac trucks. Full pipe diameter entrance desig...

The pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing bolts reduce maintenance and min...

The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component lif...

The Pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing bolts reduce maintenance and min...

HS(R) pump is horizontal centrifugal heavy duty slurry pump and it is designed for the continuous pumping of high abrasive, high density slurries with minimal maintenance requirements. It will maintain high efficiency over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing bolts reduc...

The pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing bolts reduce maintenance and min...

Sunbo Pump stocks a range of slurry pump parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc, and are used widely across the globe in mineral processing and all other solid mixture applications.

The pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing bolts reduce maintenance and mini...

Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement w...

centrifugal sand pump is designed for continuous operation of heavy slurries that are abrasive, corrosive, or just plain tough to pump. SSA Series Pump are more compact in design, and it can be adaptted for hydraulic motor drive. It is mainly used for oilfield frac trucks as well as blending and pump dealing for water well drilling solid control system applications. F...

ZGB(P) slurry pumps is horizontal cantilever single-stage, single-suction, double-case and high head of delivery centrifugal slurry pump. Series ZGB(P) UP-to-date generation Slurry Pump with large capacity, high head, multi-stages in series to remove ash & sludge and to deliver liquid-solids mixture. The series of pump has the advantages of reasonable construction, hi...

we specially works on design, develops, OEM and manufactures of oil blender frac pumps. We have types of 14x12 blender pumps, DF design type, and fracking pumps and fluid ends spare parts interchangeable with NOV Mission Magnum XP Pump 14x12 and MCM XL 12x14 pump types.

The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement would not be effective.

The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component lif...

Magnum SM series mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipments work efficiently. Features: 1. Open impeller design, ideally dealing high viscosity drilling slurries...

SM series centrifugal sand pump mainly supplies to solids control circulating system of oilfield drill rig, and be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipment work efficiently.

The 14x12x22 frac pump is using advanced manufacturing technologies and material sciences to extend the long service life. It is single stage, single suction, horizontal centrifugal slurry sand pump, which is suited for handling big capacity of abrasive, corrosive and plain tough slurries with high sand concentration, especially oil and gas stimulation and hydraulic fra...

The mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipments work efficiently.

The mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipments work efficiently.

OEM Nov Mission magnum xp pump, 14x12x22 ,widely used on the frac truck,and 100% totally interchangeable with mission pump,welcome to choose for your project.

OEM Nov Mission magnum xp pump, 14x12x22 ,widely used on the frac truck,and 100% totally interchangeable with mission pump,welcome to choose for your project.

Pump Model: 250SGH-G Flow Rate: 50tons / day Discharge Head: 200feet Application: river sand dredging Woking site: Europe

The HS series pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing bolts reduce maintenanc...

* Chemical process pump and parts in China * Chemical process pump parts include the casing, impeller ,shaft , cover, bearing house,bearing frame, adaptor ,etc * OEM castings based on customer's drawings or samples * Sand casting ,investment casting ,lost foam casting * Machinery parts manufacture The exact pump types are: STX: 1×1.5-6, 1.5×3-6,2×3-6,1×1....